Die Anycubic Photon Mono 4 is 'n opdatering van die gewilde Photon mono reeks. Die Photon Mono 4 kom in twee weergawes, die basiese een en die Ultra. Vind Anycubic Photon Mono 4 Ultrahars 3D-drukparameters in die skakel. Hierdie intreevlak-drukker het 'n LCD-resolusie van 10K. Die bouvolume is 153.4 x 87 x 165 mm en 'n LCD-resolusie van 9024 x 5120 pixels. Dit lei tot 'n XY-pixelgrootte van 17 x 17. µm. Reik uit na ons by info@liqcreate.com vir hulp. Laai die Anycubic Photon Mono 4 Chitubox-instellings vir Liqcreate hars in die skakel en begin druk met Liqcreate hars binne minute.
Anycubic Photon Mono 4 harsinstellings.
| Resin | Laag dikte | Blootstellingstyd (sekondes) | Basislaagtelling | Basislaag blootstelling | Hefhoogte (mm) | Hefspoed / intrekspoed (mm/min) | |
| Bio-Med Clear | 100 µm | 9,5 | 2 | 60 | 6 | 90 / 150 | |
| 50 µm | 7,0 | 2 | 50 | 6 | 90 / 150 | ||
| Bio-Med Flex | 100 µm | 7,0 | 2 | 40 | 10 | 60 / 90 | |
| 50 µm | 6,0 | 2 | 40 | 10 | 60 / 90 | ||
| Deep Blue | 100 µm | 8,5 | 2 | 60 | 6 | 90 / 150 | |
| 50 µm | 7,5 | 2 | 50 | 6 | 90 / 150 | ||
| Premium White | 100 µm | 5,0 | 2 | 60 | 6 | 90 / 150 | |
| 50 µm | 4,0 | 2 | 40 | 6 | 90 / 150 | ||
| Premium Black | 100 µm | 6,0 | 2 | 40 | 6 | 90 / 120 | |
| 50 µm | 4,5 | 2 | 30 | 6 | 90 / 120 | ||
| Rigid Pro | 100 µm | 6,0 | 2 | 35 | 6 | 90 / 120 | |
| 50 µm | 5,0 | 2 | 30 | 6 | 90 / 120 | ||
| Premium Model | 100 µm | 6,5 | 2 | 40 | 6 | 90 / 120 | |
| 50 µm | 5,5 | 2 | 40 | 6 | 90 / 120 | ||
| Premium Tough | 100 µm | 8,0 (50% UV-krag) | 2 | 30 | 6 | 90 / 102 | |
| 50 µm | N / A | ||||||
| Wax Castable | 100 µm | 8,0 | 2 | 60 | 6 | 90 / 120 | |
| 50 µm | 4,5 | 2 | 50 | 6 | 90 / 120 | ||
| 25 µm | 3,5 | 2 | 40 | 6 | 90 / 120 | ||
| Premium Flex* | 100 µm | 6,5 | 2 | 30 | 10 | 60 / 90 | |
| 50 µm | 5,5 | 2 | 25 | 10 | 60 / 90 | ||
| Clear Impact | 100 µm | 10,0 | 2 | 70 | 6 | 60 / 90 | |
| 50 µm | 8,0 | 2 | 70 | 6 | 60 / 90 | ||
| Stone Coal Black | 100 µm | 9,0 | 2 | 60 | 6 | 90 / 120 | |
| 50 µm | 8,0 | 2 | 50 | 6 | 90 / 120 | ||
| ESD | 100 µm | 12,0 | 2 | 70 | 6 | 90 / 120 | |
| 50 µm | 10,0 | 2 | 60 | 6 | 90 / 120 | ||
| Brandvertrager | 100 µm | 7,0 | 2 | 50 | 6 | 90 / 120 | |
| HDT | 50 µm | 5,1 | 2 | 40 | 6 | 90 / 120 | |
| Flexible-X* | 100 µm | 12 | 2 | 60 | 10 | 60 / 90 | |
| 50 µm | 10 | 2 | 50 | 10 | 60 / 90 | ||
| Elastomer-X* | 100 µm | 14,0 | 2 | 60 | 10 | 60 / 90 | |
| 50 µm | 12,0 | 2 | 60 | 10 | 60 / 90 | ||
| Hazard Glow | 100 µm | 9,0 | 2 | 60 | 6 | 90 / 120 | |
| Composite-X | 100 µm | 8,0 | 2 | 70 | 6 | 90 / 120 | |
| 50 µm | 6,0 | 2 | 70 | 6 | 90 / 120 | ||
| Tandheelkundige Model | 100 µm | 7,5 | 2 | 60 | 6 | 90 / 120 | |
| Pro Beige | 50 µm | 5,0 | 2 | 40 | 6 | 90 / 120 | |
| Tandheelkundige Model | 100 µm | 8,0 | 2 | 60 | 6 | 90 / 120 | |
| Pro Grys | 50 µm | 5,5 | 2 | 50 | 6 | 90 / 120 | |
| Gingiva Mask | 100 µm | 10,0 | 2 | 40 | 10 | 60 / 90 | |
| 50 µm | 8,0 | 2 | 40 | 10 | 60 / 90 | ||
| Skeidingsmodel | 100 µm | 7,0 | 1 | 30 | 6 | 90 / 150 | |
| 50 µm | 6,0 | 1 | 20 | 6 | 90 / 150 | ||
| Tray | 200 µm | 8,0 | 2 | 50 | 6 | 90 / 150 | |
| 100 µm | 6,0 | 2 | 40 | 6 | 90 / 150 |
* Tough-X, Flexible-X en Premium flex vereis swaar stutte, Elastomer-X vereis ekstra swaar stutte.
Oor die Anycubic Photon Mono 4 hars 3D-drukker.
Foto deur AnycubicDie nuwe 10K hars 3D-drukkers van Anycubic, die Photon Mono 4 en Photon Mono 4 Ultra.
Anycubic Photon Mono 4 hars 3D-drukker spesifikasies.
| Photon Mono 4 Ultra | Photon Mono 4 | |
| Toestelgrootte | 231 x 236 x 430 mm | 230 x 235 x 391 mm |
| Toestelgewig | 5 kg | 4 kg |
| Bou volume | 153.4 x 87 x 165 mm | |
| Drukspoed (0.1 mm laaghoogte) | Standaard hars: maks. ≤ 80 mm/h Hoëspoedhars: maks. ≤ 120 mm/h |
Standaard hars: maks. ≤ 50 mm/h Hoëspoedhars: maks. ≤ 70 mm/h |
| Laaghoogte | 0.02-0.15 mm | 0.03-0.15 mm |
| LCD display | 7-duim monochroom LCD | |
| resolusie vertoon | 10K | |
| XY resolusie | X 17 17 µm | |
| ligbron | COB-ligbron + Fresnel-lens + liguniformiteit spoedalgoritme |
Geoptimaliseerde parallelle matriksligbron, 80–90% liguniformiteit |
| Ligte eenvormigheid | ≥ 90% | 80-90% |
| Ligintensiteit | ≥ 3500 μW/cm² | ~3000 μW/cm² |
| Stel film vry | AFC uitbreiding | FEP |
| Air Suiweraar | Opsioneel (USB) | Opsioneel (herlaaibaar) |
| Toestel vertoon | 4.3 duim TFT-aanraakskerm | 2.8 duim TFT-aanraakskerm |
| Interface | USB, WiFi, LAN | USB |
| nivellering | Handmatige 4-punt nivellering | |
| Snijder | Photon Workshop | |
As u enige vrae het met betrekking tot Liqcreate 3D-drukharse op die Anycubic Photon Mono 4 of ander harsgebaseerde 3D-drukkerStuur vir ons 'n e-pos by info@liqcreate.com en ons ingenieurs sal ondersteun om die versoekte in te skakel Liqcreate hars.
Ondersteuning
Het jy enige hulp nodig met 3D-drukwerk van ons SLA? DLP of LCD-hars? Ons kan jou help! Soek net die vraag wat jy het hieronder. As jy dit nie kan vind nie, laat weet ons deur ons te kontak!
