The Phrozen Transform was one of the first larger resin 3D-printers. Today it is available in two versions, the earlier version with RGB screen and the new Phrozen Transform Fast with monochrome LCD screen. These settings are for the RGB-type Transform. As there are no settings for the Phrozen Transform Fast (Monochrome), it is advised to use resin 3D-printing parameters another Phrozen printer as a starting point, you can find these here. The settings for Liqcreate resins on the Phrozen Transform (RGB) resn 3D-printer can be found in the table below. Contact us at firstname.lastname@example.org if you need help of if your resin is not listed.
3D-printing parameters for the Phrozen Transform (RGB) resin 3d-printer
|Resin||Layer thickness||Exposure time (seconds)||Remark|
|Deep Blue||100 µm|
|Stone Coal Black||100 µm|
|Premium Black||100 µm|
|Premium Model||100 µm|
|50 µm||12,5||10 bottom layers of 80 seconds|
|Wax Castable||100 µm|
|Premium Flex||100 µm||18,0||2 bottom layers of 100 seconds|
|Premium Tough||100 µm|
|Clear Impact||100 µm|
|Hazard Glow||100 µm|
|Dental Model Pro Beige||50 µm|
|Dental Model Pro Grey||50 µm|
|Gingiva Mask||100 µm|
About the Phrozen Transform resin 3D-printer
The Phrozen Transform resin 3D-printer is available in two versions, the first released RGB printer and a newer Phrozen Transform Fast. The Phrozen Transform fast has a monochrome LCD screen and much faster exposure times. Learn more about the different large format resin 3D-printers here.
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!