The Elegoo Mars 2 Pro and Elegoo Mars 2 LCD/MSLA 3D-printer are open printers with a 405 nm light source, compatible with 3rd party resins. The following settings are optimized for Liqcreate resins. Contact us if you have any questions.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Light off-delay / bottom (seconds) |
| Deep Blue | 100 µm | 9,5 | 2 | 80 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | n/a | ||||||
| Stone Coal Black | 100 µm | 8,0 | 5 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 6,0 | 5 | 60 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Premium White | 100 µm | 2,0 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 1,5 | 2 | 40 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Premium Black | 100 µm | 3,5 | 5 | 40 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 3,2 | 8 | 30 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Premium Model | 100 µm | 2,9 | 1 | 20 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 6 | 90 / 240 | 1,0 / 3,0 | ||||
| Premium Tough | 100 µm | 6 | 90 / 240 | 1,0 / 3,0 | |||
| 50 µm | 6 | 90 / 240 | 1,0 / 3,0 | ||||
| Wax Castable | 100 µm Filigree | 4,8 | 5* | 80 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm Filigree | 4,5 | 2* | 120 | 6 | 90 / 240 | 1,0 / 3,0 | |
| 50 µm Regular | 2,6 | 2* | 120 | 8 | 45 / 240 | 4,0 / 4,0 | |
| Premium Flex | 100 µm | 5,5 | 5 | 80 | 10 | 90 / 90 | 2,0 / 3,0 |
| 50 µm | 10 | 90 / 90 | 2,0 / 3,0 | ||||
| Clear Impact | 100 µm | 6 | 90 / 240 | 1,0 / 3,0 | |||
| 50 µm | 6 | 90 / 240 | 1,0 / 3,0 | ||||
| Strong-X | 100 µm | 7,0 | 5 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 5,8 | 5 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Tough-X | 100 µm | 16,0 | 2 | 80 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 14,0 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Flexible-X | 100 µm | 10 | 90 / 240 | 1,0 / 3,0 | |||
| 50 µm | 15,0 | 2 | 60 | 10 | 90 / 180 | 1,0 / 3,0 | |
| Hazard Glow | 100 µm | 6 | 90 / 240 | 1,0 / 3,0 | |||
| Composite-X | 100 µm | 6 | 90 / 240 | 1,0 / 3,0 | |||
| 50 µm | 6 | 90 / 240 | 1,0 / 3,0 |
*Print with supports is advised, to generate enough surface between the first layers and the build plate for good adhesion.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
