Support > Printer Settings

Anycubic Photon Mono SE compatible Liqcreate resin & settings

The Anycubic Photon Mono SE is a 2K monochrome LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for Liqcreate resins. Due to its monochrome LCD screen, exposure times are roughly 1/3rd compared to the regular Anycubic Photon. With this reduced exposure time even our DLP and SLA resins can be printed with relatively reasonable printing speed. Contact us if you have any questions.

Download the Chitubox Anycubic Photon Mono SE resin parameters.

Anycubic Photon Mono SE resin 3D-printing parameters

Resin Layer thickness Exposure time (seconds) Base layer count Base layer exposure Lift Height (mm) Lift speed / retract speed (mm/min) wait time every step (seconds)
Deep Blue 100 µm 6,5 2 70 6 90 / 240 1,0
50 µm 5,0 3 70 6 90 / 240 1,0
Stone Coal Black 100 µm 6,5 2 60 6 90 / 240 1,0
50 µm 5,0 3 50 6 90 / 240 ,,0
Premium White 100 µm 4,0 2 60 6 90 / 240 1,0
50 µm n/a 6 90 / 240 1,0
Premium Black 100 µm 4,0 2 70 6 90 / 240 1,0
50 µm 3,5 2 50 6 90 / 240 1,0
Premium Model 100 µm 3,0 2 60 6 60 / 60 2,0
50 µm 2,0 2 20 6 60 / 60 2,0
Premium Tough 100 µm 5,5 2 30 6 90 / 240 2,0
50 µm 5,0 2 20 6 90 / 240 2,0
Wax Castable 100 µm 4,0 2* 60 6 60 / 90 2,0
50 µm 3,0 3* 40 6 60 / 90 2,0
Premium Flex* 100 µm 4,0 2 40 10 60 / 60 2,0
50 µm n/a
Clear Impact 100 µm 10,0 2 80 6 90 / 240 1,0
50 µm 8,0 3 60 6 90 / 240 1,0
Strong-X 100 µm 8,0 2 80 6 90 / 240 1,0
50 µm 6,5 3 80 6 90 / 240 1,0
ESD 100 µm 10,0 2 60 6 90 / 240 2,0
50 µm 8,0 2 50 6 90 / 240 2,0
Flame Retardant 100 µm 4,5 2 40 6 90 / 240 2,0
HDT 50 µm 4,0 2 30 6 90 / 240 2,0
Tough-X* 100 µm 14,0 2 80 6 90 / 240 2,0
50 µm 12,0 3 60 6 90 / 240 2,0
Flexible-X* 100 µm 9,0 2 75 10 60 / 120 2,0
50 µm n/a
Elastomer-X* 100 µm regular 16,0 2 60 10 60 / 120 2,0
50 µm regular 14,0 2 50 10 60 / 120 2,0
100 µm thin 19,0 2 60 10 60 / 120 2,0
50 µm thin 17,0 2 50 10 60 / 120 2,0
Hazard Glow 100 µm 8,0 2 60 6 90 / 240 1,0
Composite-X 100 µm 6,0 2 50 6 90 / 240 1,0
50 µm 5,0 3 40 6 90 / 240 1,0
Bio-Med Clear 100 µm 5,0 2 40 6 90 / 240 1,0
50 µm 4,0 2 30 6 90 / 240 1,0
Dental Model Pro Beige 50 µm 5,0 2 30 6 90 / 90 2,0
Dental Model Pro Grey 50 µm 3,0 2 50 6 90 / 90 2,0
Gingiva Mask 100 µm 15,0 2 80 10 60 / 60 2,0

** Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.

 

About the Anycubic Photon Mono SE

All3DP.com three new anycubic products, the Anycubic Mono, Anycubic Mono SE and Anycubic Mono X resin 3d-printer resins 3d-printing
Image: All3DP.com three new anycubic products, the Anycubic Mono, Anycubic Mono SE and Anycubic Mono X

The Anycubic Photon Mono SE: 2K Monochrome LCD resin 3D-printer

The Anycubic Photon Mono SE has a 6-inch monochrome LCD display. With its new technology, the Photon Mono prints at unbelievable printing speeds, so that it only takes 1-2 seconds per layer – compared to conventional LCD 3D printers with 7-8 seconds per layer. The monochrome LCD is also thermally stable and has a much longer service life than conventional LCD displays. You can print with it for over 2000 hours! In addition, thanks to the larger LCD display, the Photon Mono SE also has a slightly larger installation space of 130 x 78 x 160 mm.

New matrix light source

The new matrix light source has been redesigned and consists of several UV LED lights that have a more even exposure. This not only improves accuracy but also enables faster exposure times and better heat dissipation.

Anycubic App Remote Control

The Photon Mono SE has a WiFi module, so you have much more convenient connectivity than conventional 3D printers. You can also connect your Photon Mono SE using the Anycubic app, where you can monitor your printing process or adjust the print settings.

High stability

The Anycubic Photon Mono SE has a metal housing and stable dual linear rails to significantly improve the resin print stability and success rate.

 

Contact us if you have any questions or when you need help with settings for the Anycubic Photon Mono SE or other resin based 3D-printers.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Liqcreate Strong-X 1KG bottle

    Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Wax Castable for casting objects using LCD/MSLA, DLP and SLA 3D printing

    Wax Castable

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Flexible-X resin for SLA DLP LCD flexible and elastic 3D printing

    Flexible-X

    Categories:
    EAN: N/A SKU: N/A
    Clear