Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Anycubic Photon Mono X 6K

The Anycubic Photon Mono X 6K is one of Anycubic’s latest releases in 2021. With its 6K monochrome LCD screen, the Anycubic Photon Mono X 6K is completely open for 3rd party resins. Due to the speed of new printer releases, settings for the Anycubic Photon Mono X 6K are not available yet. Since the basics of most monochrome Anycubic resin 3D-printers are similar, a good starting point would be the settings that we have published for the Anycubic Photon Mono XContact us if you have any questions or when you need help with settings.

 

Anycubic Photon Mono X 6K resin 3D-printing parameters

Resin Layer thickness Exposure time (seconds) Base layer count Base layer exposure Lift Height (mm) Lift speed / retract speed (mm/min) Off-time / bottom (seconds)
Deep Blue 100 µm
50 µm
Stone Coal Black 100 µm
50 µm
Premium White 100 µm
50 µm
Premium Black 100 µm
50 µm
Premium Model 100 µm
50 µm
Premium Tough 100 µm
50 µm
Wax Castable 100 µm
50 µm
Premium Flex 100 µm
50 µm
Clear Impact 100 µm
50 µm
Strong-X 100 µm
50 µm
Tough-X 100 µm
50 µm
Flexible-X 100 µm
50 µm
Hazard Glow 100 µm
Composite-X 100 µm
50 µm
Dental Model Pro Beige 50 µm
Dental Model Pro Grey 50 µm
Gingiva Mask 100 µm

*Heavy supports are adviced for Flexible-X and Tough-X

About the Anycubic Photon Mono X 6K

Anycubic photon mono X 6K compatible resins engineering resin Liqcreate high quality low odor no odour technical precise accurate resins

Image by Anycubic: The new Anycubic Photon Mono X 6K

The Anycubic Photon Mono X 6K is Anycubics latest addition in its resin 3D-printer offering in 2021. With a relatively large platform size of 197 x 122 x 245 mm (L x W x H) and 6K resolution, the Anycubic Photon Mono X 6K is competing with the larger resin 3D-printers like Anycubics own Photon Mono X, the Elegoo Jupiter, Phrozen Sonic Mega 8K, the Epax X156, and many more. Its monochrome LCD screen has a longer life-time than conventional RGB screens present in the older generation MSLA resin 3D-printers. Additionally the exposure times are much faster, which makes it easier to process slower resins, like the Liqcreate DLP and SLA range. Unfortunately at the time of writing there are no settings verified yet for the Anycubic Photon Mono X 6K. As most Anycubic machines work similar, a good starting point would be to use the settings for the Anycubic Photon Mono X. Settings will be published on this page when available. Contact us if you have any questions or when you need help with settings for the Anycubic Photon Mono X 6K or other resin based 3D-printers.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Tough-X Impact resin

    Tough-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Flexible-X resin for SLA DLP LCD flexible and elastic 3D printing

    Flexible-X

    Categories:
    EAN: N/A SKU: N/A
    Clear