The Anycubic Photon Mono-X is an 4K monochrome LCD / MSLA resin 3D-printer. The Anycubic Photon Mono-X is compatible with Liqcreate resinsThe following settings are optimized for Liqcreate resin. Due to its monochrome LCD screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. More information about the differences between the Anycubic Photon Mono-X and other Anycubic Photon resin 3D-printers can be found here. Contact us if you have any questions about the resin or Photon Mono-X settings.
Download the Chitubox settings for the Anycubic Photon Mono-X here.
Anycubic Photon Mono-X resin settings
Resin | Layer thickness | % UV Power | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) |
Deep Blue | 100 µm | 100 | 9,0 | 2 | 75 | 6 | 90 / 240 |
50 µm | 100 | 5,0 | 2 | 60 | 6 | 90 / 240 | |
Stone Coal Black | 100 µm | 100 | 9,0 | 2 | 75 | 6 | 90 / 240 |
50 µm | 100 | 5,0 | 2 | 60 | 6 | 90 / 240 | |
Premium White | 100 µm | 50 | 5,0 | 2 | 65 | 6 | 90 / 240 |
50 µm | 50 | 3,0 | 2 | 65 | 6 | 90 / 240 | |
Premium Black | 100 µm | 100 | 2,0 | 2 | 75 | 6 | 90 / 240 |
50 µm | 100 | 1,7 | 2 | 75 | 6 | 90 / 240 | |
Premium Model | 100 µm | 60 | 4,0 | 1 | 35 | 6 | 60 / 240 |
50 µm | 60 | 2,5 | 1 | 35 | 6 | 60 / 240 | |
Premium Tough | 100 µm | 65 | 9,0 | 2 | 50 | 6 | 90 / 240 |
50 µm | N/a | ||||||
Wax Castable | 100 µm | 60 | 3,7 | 2 | 60 | 6 | 90 / 240 |
50 µm | 60 | 3,0 | 2 | 60 | 6 | 90 / 240 | |
25 µm | |||||||
Premium Flex | 100 µm | 60 | 6,0 | 1 | 75 | 10 | 90 / 240 |
50 µm | N/a | ||||||
Clear Impact | 100 µm | 60 | 11,0 | 2 | 75 | 6 | 90 / 240 |
50 µm | 60 | 9,0 | 2 | 75 | 6 | 90 / 240 | |
Strong-X | 100 µm | 100 | 9,0 | 2 | 75 | 6 | 90 / 240 |
50 µm | 100 | 5,0 | 2 | 60 | 6 | 90 / 240 | |
Tough-X | 100 µm | 100 | 15,0 | 1 | 80 | 6 | 90 / 240 |
50 µm | 100 | 12,0 | 1 | 80 | 6 | 90 / 240 | |
Flexible-X | 100 µm | 100 | 13,0 | 2 | 75 | 10 | 90 / 240 |
50 µm | 100 | N/a | |||||
Hazard Glow | 100 µm | 100 | 10,0 | 2 | 80 | 6 | 90 / 240 |
Composite-X | 100 µm | 90 | 7,5 | 2 | 80 | 6 | 90 / 240 |
50 µm | 90 | 6,5 | 2 | 80 | 6 | 90 / 240 | |
Dental Model Pro Beige | 50 µm | 100 | 3,5 | 1 | 60 | 6 | 42 / 240 |
Dental Model Pro Grey | 50 µm | 100 | 3,5 | 1 | 60 | 6 | 42/ 240 |
Gingiva Mask | 100 µm | 100 | 14,0 | 6 | 30 | 8 | 42 / 240 |
Engineering part of Liqcreate Composite-X resin 3D-printed on an Anycubic Photon Mono-X.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!