Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Anycubic Photon?

The Anycubic Photon is a low power LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for all Liqcreate resins. Due to the low power light source, exposure times are generally longer. Liqcreate Premium White is especially developed for printing on low power LCD 3D-printing, leading to significantly shorter exposure times.

 

Resin Layer thickness Settings Remark
Deep Blue 100 µm 32 seconds 3 x 150s bottom, 2s off-time
50 µm 22 seconds 8x 60s bottom, 2s off-time
25 µm 20 seconds 8x 60s bottom, 2s off-time
Stone Coal Black 100 µm 32 seconds 3x 170s bottom, 2s off-time
50 µm 27 seconds 3x 170s bottom, 2s off-time
25 µm 23 seconds 3x 150s bottom, 2s off-time
Premium White 100 µm 16 seconds 8 x 50s bottom, 2s off-time
50 µm 13 seconds 8 x 50s bottom, 2s off-time
25 µm 10 seconds 8 x 50s bottom, 2s off-time
Premium Black 100 µm 16 seconds 2 x 150s bottom, 2s off-time
50 µm 13 seconds 2 x 150s bottom, 2s off-time
25 µm 10 seconds 2 x 150s bottom, 2s off-time
Clear Impact 100 µm 32 seconds 2 x 190s bottom, 2s off-time
50 µm 27 seconds 2 x 170s bottom, 2s off-time
25 µm n/a n/a
Strong-X 100 µm 30 seconds 2 x 120 bottom, 2s off-time
50 µm 25 seconds 2 x 120 bottom, 2s off-time
25 µm 21 seconds 4 x 100 bottom, 2s off-time
Hazard Glow 100 µm
50 µm 45 seconds Preliminary setting

8x 90s bottom

25 µm

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us