The Miicraft 125 3D-printer is a high quality DLP machine. The machine comes in two different versions, the 125 and the 125Y. The difference between these machines is the light source in which the 125Y prints at 385nm and the 125 uses a 405nm light source.
The Miicraft machines are completely open and have a wide variety of setting which can be adjusted. The most important setting for getting high quality prints are the power of the light source, which should be set at 3.5A for printing with Liqcreate resins. The second most important parameters is the exposure time, which can be found in the table below.
| Resin | Layer thickness | Settings | Remark |
| Deep Blue | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Stone Coal Black | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Premium White | 100 µm | 0,8 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Premium Black | 100 µm | 0,8 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Premium Model | 100 µm | 0,8 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Clear Impact | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Strong-X | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power | |
| Tough-X | 100 µm | 2,5 seconds | Preliminary settings |
| 50 µm | n/a | ||
| Hazard Glow | 100 µm | 1,5 seconds | 3,5 A power |
| 50 µm | 1,3 seconds | 3,5 A power |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
