Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Peopoly Moai?

The Peopoly Moai is a SLA 3D-printer with a 70 micron Laser spot size, 140 mw Laser power and 405 nm light source (Laser wave length). This 3D printer is completely open for 3rd party resins. Settings are optimized for the Liqcreate resins.

 

Resin Layer thickness Laser power Remark
Deep Blue 100 µm 53
50 µm 53
35 µm 53
Stone Coal Black 100 µm Not yet tested. Laser power 53 is a good starting point.
50 µm Not yet tested. Laser power 53 is a good starting point.
35 µm Not yet tested. Laser power 53 is a good starting point.
Premium White 100 µm
50 µm
35 µm
Premium Black 100 µm
50 µm
35 µm
Clear Impact 100 µm 58
50 µm 58
35 µm 58
Strong-X 100 µm Not yet tested. Laser power 53 is a good starting point.
50 µm Not yet tested. Laser power 53 is a good starting point.
35 µm Not yet tested. Laser power 53 is a good starting point.
Hazard Glow 100 µm Not yet tested. Laser power 53 is a good starting point.
50 µm Not yet tested. Laser power 53 is a good starting point.
35 µm Not yet tested. Laser power 53 is a good starting point.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us