The Qidi Tech Shadow 5.5S LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Due to the low power of the LED and RGB-LCD technology, the Premium resin range works best on this printer. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Premium Black | 100 µm | ||
| 50 µm | 18 | 2 base layers of 80 seconds | |
| Deep Blue | 100 µm | ||
| 50 µm | |||
| Stone Coal Black | 100 µm | ||
| 50 µm | |||
| Premium White | 100 µm | ||
| 50 µm | |||
| Premium Model | 100 µm | ||
| 50 µm | |||
| Premium Flex | 100 µm | ||
| 50 µm | |||
| Premium Tough | 100 µm | ||
| 50 µm | |||
| Clear Impact | 100 µm | ||
| 50 µm | |||
| Strong-X | 100 µm | ||
| 50 µm | |||
| Tough-X | 100 µm | ||
| 50 µm | |||
| Flexible-X | 100 µm | ||
| 50 µm | |||
| Hazard Glow | 100 µm | ||
| 50 µm | |||
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
