The Shining 3D AccuFAB D1 DLP 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. The following settings are optimized for Liqcreate resins.
Resin | Layer thickness | Curing time (seconds) | Remark |
Deep Blue | 100 µm | ||
50 µm | |||
35 µm | |||
Stone Coal Black | 100 µm | ||
50 µm | |||
35 µm | |||
Premium White | 100 µm | ||
50 µm | |||
35 µm | |||
Premium Black | 100 µm | ||
50 µm | |||
35 µm | |||
Premium Model | 100 µm | ||
50 µm | 3,50 | 5 base layers of 16 seconds | |
35 µm | |||
Premium Flex | 100 µm | ||
50 µm | |||
35 µm | |||
Premium Tough | 100 µm | ||
50 µm | |||
35 µm | |||
Clear Impact | 100 µm | ||
50 µm | |||
35 µm | |||
Strong-X | 100 µm | ||
50 µm | |||
35 µm | |||
Tough-X | 100 µm | ||
50 µm | |||
35 µm | |||
Flexible-X | 100 µm | ||
50 µm | |||
35 µm | |||
Hazard Glow | 100 µm | ||
50 µm | |||
35 µm |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!