Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Uniz Slash?

The Slash 3D-printer from Uniz is a medium power LCD 3D-printer and completely open for 3rd party resins. Settings are optimized for most Liqcreate resins. Due to the low power of the light source, the Premium resin range works best on this printer. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.

Contact us

 

Resin Layer thickness Curing time (seconds) Remark
Deep Blue 100 µm 18,3 Base 21 seconds
50 µm 14,7 Base 18 seconds
Stone Coal Black 100 µm 16,2 Base 22 seconds
50 µm 11,6 Base 22 seconds
Premium White 100 µm 8,1 Base 18 seconds
50 µm 6,6 Base 18 seconds
Premium Black 100 µm 8,4 Base 16 seconds
50 µm 6,9 Base 16 seconds
Premium Model 100 µm 8,5 Base 16 seconds
50 µm 7,0 Base 16 seconds
Premium Flex 100 µm
50 µm 8,0 3 base layers of 16 seconds
Clear Impact 100 µm
50 µm
Strong-X 100 µm 18,5 base 25 seconds
50 µm 20,0 base 25 seconds
Tough-X 100 µm 20,0 base 40 seconds
50 µm
Hazard Glow 100 µm
50 µm

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Tough-X Impact resin

    Tough-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Resin Cleaner SLA DLP LCD 3D printer

    Resin Cleaner

    Categories:
    EAN: 8720256386063 SKU: LRC0X000
    Clear