Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Wanhao Duplicator 7?

The Wanhao Duplicator 7 is a low power LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for all Liqcreate resins. Due to the low power light source of the Wanhao D7, exposure times are generally longer. Liqcreate Premium White is especially developed for printing on low power LCD 3D-printing, leading to significantly shorter exposure times.

Resin Layer thickness Curing time (seconds) Remark
Deep Blue 100 µm 24 First layers 2x 160 seconds
50 µm 22
35 µm 21
Stone Coal Black 100 µm 22
50 µm 15
35 µm 15
Premium White 100 µm 11
50 µm 9
35 µm 7
Premium Black 100 µm 14 First layers 2x 180 seconds
50 µm 13 First layers 2x 140 seconds
35 µm 12
Clear Impact 100 µm 22 First layers 1x 160 seconds
50 µm 18
35 µm n/a
Strong-X 100 µm 26 First layers 2x 160 seconds
50 µm 22
35 µm 21
Hazard Glow 100 µm 26 First layers 2x 180 seconds
50 µm n/a
35 µm n/a

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us