The Elegoo Saturn 2 was one of the most advanced MSLA 3D‑printers in the mid‑format segment, equipped with a high‑transmittance 8K monochrome LCD and a powerful 405 nm UV light engine designed for fast, accurate and consistent resin curing. As part of Elegoo’s expanding Saturn‑series, the Saturn 2 builds on the success of earlier models by offering a larger build volume, improved optical uniformity and significantly enhanced detail reproduction. These upgrades make the Saturn 2 suitable for engineering prototypes, functional components, dental models and high‑resolution miniature production.
With its 7680 × 4320 pixel LCD, 28.5‑micron XY resolution and a generous 219 × 123 × 250 mm build volume, the Saturn 2 provides an excellent balance between precision and throughput. The redesigned Fresnel‑collimated light source delivers uniform UV exposure across the entire platform, resulting in predictable curing behavior and stable performance with Liqcreate engineering, dental and general‑purpose resins. This page provides all validated Liqcreate resin settings for the Elegoo Saturn 2, including exposure times, lift parameters and workflow notes for reliable MSLA printing.
Elegoo has also introduced the Saturn 8K and several other variants in the same product family, making it increasingly challenging for users to compare specifications and choose the right model. You can read more about the differences between Elegoo Saturn printers in our comparison resources. Based on internal testing and partner feedback, most Liqcreate resins are expected to run reliably on the Saturn 2 due to its strong UV output, stable Z‑axis mechanics and efficient optical engine. If you have questions about resins without listed settings, our engineering team is available to assist you through our support page. Return to the full Liqcreate 3D‑printer compatibility overview.
Elegoo Saturn 2 resin 3D‑printing settings
Below you can find all validated Liqcreate resin settings for the Elegoo Saturn 2, including exposure times, lift parameters and workflow notes for stable MSLA printing.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Rest time in every step (seconds) |
| Deep Blue | 50 µm | 6,5 | 3 | 35 | 6,0 | 90 / 150 | 2,0 |
| Premium White | 50 µm | 4,0 | 3 | 30 | 6,0 | 90 / 150 | 2,0 |
| Premium Model | 50 µm | 2,5 | 3 | 25 | 6,0 | 90 / 150 | 2,0 |
| Wax Castable | 100 µm | 6,5 | 2 | 30 | 6,0 | 60 / 90 | 2,0 |
| Strong-X | 50 µm | 10,0 | 4 | 70 | 6,0 | 90 / 120 | 2,0 |
| Clear Impact | 50 µm | 12,0 | 3 | 60 | 6 | 60 / 90 | 2,0 |
| Flexible-X | 100 µm | 16,0 | 2 | 60 | 10 | 60 / 90 | 2,0 |
| Tough-X | 50 µm | 10,0 | 2 | 60 | 8,0 | 90 / 150 | 2,0 |
| Elastomer-X | 50 µm | 18,0 | 4 | 50 | 10 | 60 / 90 | 2,0 |
| Bio-Med Clear | 50 µm | 8,0 | 4 | 100 | 6 | 90 / 150 | 2,0 |
| Composite-X | 100 µm | 13,0 | 2 | 60 | 8 | 60/90 | 2,0 |
*all profiles used 6 transition layers, except otherwise noted.
About the Elegoo Saturn 2, 8K resin MSLA 3D‑printer
The Elegoo Saturn 2 features a 10‑inch 8K monochrome LCD jointly developed by Elegoo and Innolux, offering a UHD resolution of 7680 × 4320 pixels and a 380:1 contrast ratio. This enables highly detailed prints with sharp edges and micron‑level accuracy. The printer supports layer thicknesses from 0.01 to 0.2 mm and delivers significantly faster curing compared to earlier RGB‑LCD systems.
Image: Elegoo Saturn 2, 8K MSLA resin 3D‑printer
Elegoo Saturn 2 (8K) vs Elegoo Saturn 8K
Elegoo has released multiple 8K printers with similar specifications, making it difficult for users to distinguish between models. The table below highlights the key differences between the Elegoo Saturn 2 8K and the Elegoo Saturn 8K.
The most notable difference is the optical engine:
- Saturn 8K uses a 28‑LED matrix light source
- Saturn 2 8K uses a 48‑LED array with Fresnel lenses for improved collimation and uniformity
This results in more consistent curing across the build plate on the Saturn 2.
| Elegoo Saturn 8K | Elegoo Saturn 2 8K | |
| System | EL3D-3.0.1 | EL3D-3.0.1 |
| LCD Screen pixels | 7680*4320 pixels | 7680*4320 pixels |
| Pixel size | 28,5 micron | 28,5 micron |
| Build size | 123 x 218 x 250 mm | 123 x 218 x 250 mm |
| Printing speed | 30 – 70 mm/h | 30 – 70 mm/h |
| LED’s | 28 Matrix UV light source | 48 LED’s with Fresnel lens |
| Wavelength | 405 nm | 405 nm |
Elegoo Saturn 2 (8K) resin 3D‑printer specifications
- – 10″ 8K monochrome LCD
- – 7680 × 4320 resolution
- – Build volume: 123 × 218 × 250 mm (W × L × H)
- – Dual linear rails
- – LCD protective film
- – Third‑party materials supported (405 nm resins
Support
If you have any questions or need help with settings for the Elegoo Saturn 2 8K MSLA series or other resin‑based 3D‑printers, our engineering team is available to assist you.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
