The Apex‑Maker X1 has rapidly positioned itself as a capable large‑format LCD resin 3D printers in the prosumer and industrial segment, combining a 16‑inch 8K monochrome LCD, a massive 353 × 198 × 400 mm build volume, and a high‑energy 405 nm light engine that enables both high detail and high throughput. With its 46 µm pixel size, dual linear guides, closed‑loop Z‑drive, and automated resin feed and drain system, the X1 is engineered for stable, repeatable production workflows where dimensional accuracy and surface quality must remain consistent across large prints or multi‑part batches. Its pre‑calibrated build plate, heated resin vat, and high LCD transmittance further support demanding engineering resins that benefit from controlled viscosity and fast polymerization.
For users working with Liqcreate engineering, dental, and specialty photopolymers, the Apex‑Maker X1 offers a strong hardware foundation for reliable curing behavior. The printer’s 10 mW/cm² light source and high‑speed data pipeline allow Liqcreate materials to reach their intended cure depth and mechanical performance. The combination of 30–150 µm layer thickness capability and stable peel mechanics makes the X1 suitable for rigid composites, functional prototyping resins, elastomers, and high‑precision dental model materials.
Because the X1 operates at 30–80 mm/h standard speed and can reach up to 180 mm/h with suitable materials, exposure tuning for Liqcreate resins typically focuses on balancing cure depth with peel forces across the large build area. The printer’s heated vat (up to 60 °C/140°F) can further improve flow and recoat behavior for high‑viscosity grades. These hardware characteristics make the X1 a strong match for Liqcreate’s portfolio, provided that exposure times, lift speeds, and rest times are correctly dialed in for each resin.
In this article, you will find Liqcreate resin parameters for the Apex‑Maker X1, including exposure settings, lift profiles, and recommended layer thicknesses for some materials. If the specific Liqcreate resin you need is not listed, or if you require custom tuning for a specialized application, please contact us at info@liqcreate.com — we can help you generate optimized parameters for your workflow.
Apex-Maker X1 resin settings
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | |
| Strong-X | 50 µm | 10 | 6 | 50 | 8 | 80 / 200 |
** Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
About the Apex-Maker X1 resin 3D-printer.
Image by Apex-Maker: The new Apex-Maker X1 resin 3D-printer.
Apex-Maker X1 resin 3D-printer specifications
| Sonic Mighty Revo | Apex-Maker X1 | |
| Device size | 353 x 345 x 517 mm | 548 x 440 x 8620 mm |
| Build volume | 223 x 126 x 235 mm | 353 x 199 x 400 mm |
| LCD | 14K Monochrome | 8 K Monochrome |
| XY resolution | 16.8 x 24 µm | 46 µm |
| Guide rails | dual linear guide rail (ball screws) | unknown |
| Film | NFEP | high-speed TSP film |
| Heater | Yes | Yes |
| Plug-in Air Purifier | Yes | unknown |
| Automatic levelling | Yes | unknown |
If you have any questions related to Liqcreate 3D-printing resins on the Apex-Maker X1 or other resin based 3D-printer. Send us an e-mail at info@liqcreate.com and our engineers will support with the requested Liqcreate resin.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
