The Anycubic Photon Zero was once one of the most accessible entry‑level LCD printers on the market, and users frequently search for the best anycubic photon zero resin to achieve reliable curing, accurate details, and consistent print performance. As a 480P RGB‑LCD system with a low‑power light engine, the Photon Zero requires resins that can cure efficiently under limited light intensity. A select amount of Liqcreate materials have been optimized for this printer, offering dependable exposure settings and stable print results across a wide range of applications.
Because the Photon Zero uses a weaker RGB backlight compared to modern monochrome LCD printers, exposure times are naturally longer. When settings for a specific Liqcreate resin are not yet available, an excellent starting point is the validated parameter set developed for the original Anycubic Photon, which shares similar curing behavior. This makes it easy for users to dial in the correct exposure values and quickly identify the most suitable anycubic photon zero resin for their workflow.
Whether you are printing prototypes, miniatures, functional parts, or general‑purpose models, choosing a resin formulated for low‑power LCD systems is essential for achieving consistent results. If you need assistance selecting the right material or fine‑tuning your exposure parameters, our technical team is ready to support you with guidance tailored to the Photon Zero. Settings are optimized for some Liqcreate resins. For the settings that are not available, a good starting point are the settings published for the Anycubic Photon. Contact us if you have any questions or when you need help with settings.
Anycubic Photon Zero resin 3D-printing parameters
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | Off-time / bottom (seconds) |
| Flexible-X | 100 µm | 26 | 2 | 120 | 10 | 90 / 240 | 0,5 / 3,0 |
| 50 µm | n/a |
*Heavy supports are adviced for Flexible-X and Tough-X
About the Anycubic Photon Zero resin 3D-printer.
Anycubic Photon Zero resin 3D-printer specifications.
The Anycubic Photon Zero has 480P RGB LCD display. With this technology, the Anycubic Photon Zero is one of the most affordable resin 3D-pritners available. Due to the RGB LCD technology, print speed is slower compared to the new monochrome LCD resin 3D-printers. The build platform of the Anycubic Photon Zero is 97 x 54 x 150 mm and the Zero has a XY resolution of 0,1155mm. This is a significantly lower resolution and print speed as Anycubic’s newer monochrome LCD resin 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
