Technical specifications
Liqcreate Hazard Glow is the first ever glow in the dark photopolymer resin and compatible with open SLA, DLP and MSLA 3D-printers in a range of 385 – 405nm. This material is optimized in having the highest possible glow in the dark effect and can be activated with almost every light source.
| Mechanical Properties | UV post-curing[1] | ||
|---|---|---|---|
| Description | ASTM Method | Metric | Imperial |
| Tensile strength | D638 | 49 MPa | 7.1 ksi |
| Tensile modulus | D638 | 1.6 GPa | 232 ksi |
| Elongation at break | D638 | 5% | 5% |
| Flexural strength | D790 | 48 MPa | 7.0 ksi |
| Flexural modulus | D790 | 1.4 GPa | 203 ksi |
| IZOD Impact (notched) | D256A | 10 J/m | 0.19 ft-lb/in |
| Shore D Hardness | D2240 | 77 | 77 |
| Water sorption | D570-98 | 0.30% | 0.30% |
| Tg | D7028 | 51°C | 124°F |
| Degradation temperature | Internal method | >200°C[2] | 392°F[2] |
[1]Post-cured 30 minutes with LED curing in the Wicked Engineering Curebox. These values may vary and depend on individual machine processing and post-curing. [2]Softening above HDT, yellowing starts at 200°C / 392°C, but no cracking in part up to 200°C / 392°F.
Tilt screen to see the complete technical specifications table
| Description | Value |
|---|---|
| Appearance | Green Opaque liquid |
| Viscosity | 1300 cps at 25°C |
| Density | 1.32 g/cm3 |
| Ec (405nm) | 9.88 mJ/cm2 |
| Dp (405n) | 0.20 mm |
| Ec (385nm) | 6.07mJ/cm2 |
| Dp (385nm) | 0.10 mm |
More information
Values may vary and depend on individual machine processing and post-curing. For extra details on Liqcreate Hazard Glow resin, download the technical data sheet or user guide.
⤓ Technical Data Sheet ⤓ Processing instructions ⤓ User Guide
| H317: May cause an allergic skin reaction. |
| H412: Harmful to aquatic life with long lasting effects. |
3D Printer compatibility
Do you want to use Liqcreate Hazard Glow, Glow in the dark 3D-printing resin? Check if settings with Hazard Glow are available on our website for your printer!
| Printer name | Compatible? |
| atum3D DLP Station 5 | Yes |
| Formlabs Form 1+ | Yes |
| Miicraft 125 | Yes |
| Peopoly Phenom Prime | Yes |
| Peopoly Moai | Yes |
| XYZ Nobel 1.0A | Yes |
| Anycubic Photon | Yes |
| Anycubic Photon Mono | Yes |
| Anycubic Photon Mono SE | Yes |
| Anycubic Photon Mono X | Yes |
| Anycubic Photon Mono 4 Ultra | Yes |
| Anycubic Photon M3 | Yes |
| Anycubic Photon M3 Plus | Yes |
| Anycubic Photon M3 Max | Yes |
| Anycubic Photon Mono M5s | Yes |
| Anycubic Photon Mono M7 Pro | Yes |
| Anycubic Photon Mono M7 Max | Yes |
| Anycubic Photon D2 | Yes |
| Creality Halot-One | Yes |
| Creality Halot Play | Yes |
| Creality Halot-Sky | Yes |
| Creality Halot-Max | Yes |
| Elegoo Mars | Yes |
| Elegoo Mars 2 | Yes |
| Elegoo Mars 3 | Yes |
| Elegoo Mars 4 | Yes |
| Elegoo Mars 5 | Yes |
| Elegoo Mars 5 Ultra | Yes |
| Uniformation GKTwo | Yes |
| Elegoo Saturn | Yes |
| Elegoo Saturn 3 | Yes |
| Elegoo Saturn 4 Ultra | Yes |
| Phrozen Sonic Mini 4K | Yes |
| Phrozen Sonic Mini 8K | Yes |
| Phrozen Sonic Mini 8K S | Yes |
| Phrozen Sonic Mighty 4K | Yes |
| Phrozen Sonic Mighty Revo 14K | Yes |
| Phrozen Sonic Mega 8K V2 | Yes |
| Kudo3D Bean | Yes |
| Reify Solus Pro | Yes |
| Zortrax Inkspire | Yes |
| Zortrax Inkspire 2 | Yes |
| Prusa SL1S Speed | Yes |
| UnionTech Martrix300 | Yes |
| Asiga Series | No |
| 385 – 405nm MSLA, SLA & DLP printer | Contact us |
Hazard Glow use cases
Liqcreate Hazard Glow is perfect for creating green glow in the dark objects.
Matthieu Claudel –
Very nice glow-in-the-dark effect also just after finish printing! But after 6 hours the glow effect is fading. Still very easy to use and the results are impressive!
Gary Hirst –
Beautiful