Support >

B9Creations new Core 6 Series MPro – Large B9C DLP resin printer

Founded in 2014, South Dakota-based manufacturer of resin 3D printers B9Creations has unveiled its largest resin 3D printer to date – the Core 6 Series MPro. They launched this alongside the B9 CleanPro post-processing unit, at RAPID + TCT 2023.

About the B9Creations Core 6 series MPro resin 3D-printer

liqcreate resin b9c b9creations core 6 series mpro photopolymer resins material tough strong elastic cast wax abs-like pp-like flex flexible ABS polymer

image by B9Creations: their new large format B9C Core 6 series MPro resin 3D-printer.


B9C Core 6 series MPro resin 3D-printer specifications

With the announcement, not a lot specifications are known. the only things known are the printer features a build volume of 192 x 108 x 304 mm and according to B9C has an effective resolution finer than 40µm. No specs on the tech within the printer is known. but usually when hearing the build volume of 192×108, it rings a bell. as standard HD projectors have 1920 x 1080 pixels and if you would set the DLP at 100 micron pixel size, you will end-up with that exact build frame. it could be that the manufacturers use a 4K projector with 3840 x 2160 pixels and use a 50 micron pixel size to reach the same build area. As time will pass this will likely get clarified by B9C. their previous printers can be ordered as 405nm or 385nm versions. for the B9C Core 6 series it is not yet known which configurations are available.


Resin compatibility with the B9creations Core 6 MPro 3D-printer

At the time of writing we do not settings for the B9creations Core 6 MPro resin 3D-printer, if that changes we will update it in our resin-printer compatibility page. We expect that this printer runs at 405 and/or 385nm. If that is actually the case then technically all Liqcreate resins can work. Send an e-mail to if you want to be informed on resin compatibility or if you want to try our resins on the B9C printer and need support. Team Liqcreate wish you happy printing for the lucky people who get their hands on a new B9Creations Core 6 MPro resin 3D-Printer. If there are any questions or remarks, feel free to contact us at any time.


Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Technical →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us

Our Best Selling Products

  • Liqcreate Strong-X 1KG bottle


    EAN: N/A SKU: N/A
  • Liqcreate Wax Castable for casting objects using LCD/MSLA, DLP and SLA 3D printing

    Wax Castable

    EAN: N/A SKU: N/A
  • Liqcreate Bio-Med Clear 1KG bottle no shade 939x939

    Bio-Med Clear

    EAN: N/A SKU: N/A