The Phrozen Shuffle 2018 is released a couple years ago. These resin 3D-printers are based on RGB LCD technology. RGB technology has a downside that less light is passing the LCD screen and the exposure times will be extended. Additionally the life-time of the LCD screens are lower compared to the new monochrome LCD technology. If you are looking for a new MSLA / LCD type of resin printer, it is advised to choose one with at least a monochrome LCD screen. The Phrozen Shuffle 2018 doesn’t have this, but there are plenty of newer Phrozen models, or other brands that offer these. The Liqcreate premium resin range will print fastest on these RGB type printers. Not all settings have been optimized and some starting settings are available now. Contact us if you need support or have any questions.
Phrozen Shuffle 2018 resin 3D-printing parameters
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Wax Castable | 100 µm | ||
| 50 µm | 11,0 | 2 base layers of 80 seconds | |
| 35 µm | |||
| Stone Coal Black | 100 µm | ||
| 50 µm | |||
| Premium White | 100 µm | ||
| 50 µm | |||
| Premium Black | 100 µm | ||
| 50 µm | |||
| Premium Model | 100 µm | ||
| 50 µm | |||
| Clear Impact | 100 µm | ||
| 50 µm | |||
| Strong-X | 100 µm | ||
| 50 µm | |||
| Tough-X | 100 µm | ||
| 50 µm | |||
| Hazard Glow | 100 µm | ||
| 50 µm | |||
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
About the Phrozen Shuffle 2018 resin 3D-printer.
Phrozen Shuffle 2018 resin 3D-printers specifications
The Phrozen Shuffle 2018 resin 3D-printers is based on RGB LCD technology. Liqcreate Premium resin range will print fastest on these type of LCD / MSLA printers. Specifications of the Phrozen Shuffle 2018 resin 3D-printer:
- – Printer Size: 28 x 28 x 42 cm
- – Printer Weight: 13 Kg
- – Printing Volume: 12 x 6.8 x 20 cm
- – XY Resolution: 47 µm
- – Z Resolution: 10 µm
- – Printing Speed: 30 mm per hour
- – Recommended Layer Height: 10 – 100 µm
Contact us if you have any questions or when you need help with settings for the Phrozen or other resin based 3D-printers.
