Support > Printer Settings

Resin settings for the Elegoo Saturn 3D-printer

The Elegoo Saturn 4K Monochrome LCD/MSLA resin 3D-printer is a printer with a 405 nm light source, compatible with 3rd party resin. Learn about the different Elegoo Saturn and mars 3d-printers here or on the official Elegoo Saturn website. All Liqcreate resins are compatible with the Elegoo Saturn. Contact us if you need support or have any questions.

Download the Chitubox settings for the Elegoo Saturn here.

Contact us

 

Resin Layer thickness Exposure time (seconds) Base layer count Base layer exposure Lift Height Lift speed / retract speed (mm/min) Light off-delay / bottom (seconds)
Deep Blue 100 µm 12,0 2 40 6 90 / 240 1,0 / 3,0
50 µm 9,0 2 30 6 90 / 240 1,0 / 3,0
Stone Coal Black 100 µm 12,0 2 40 6 90 / 240 1,0 / 3,0
50 µm 9,0 2 30 6 90 / 240 1,0 / 3,0
Premium White 100 µm 4,5 2 20 6 90 / 240 1,0 / 3,0
50 µm 2,5 2 20 6 90 / 240 1,0 / 3,0
Premium Black 100 µm 4,0 2 30 10 60 / 120 5,0 / 5,0
50 µm 3,0 2 20 10 60 / 120 5,0 / 5,0
Premium Model 100 µm 4,5 2 30 6 90 / 120 1,0 / 3,0
50 µm 4,0 2 15 6 90 / 120 2,0 / 3,0
Premium Tough 100 µm 9,0 1 30 10 60 / 120 5,0 / 5,0
50 µm 7,0 1 25 10 60 / 120 5,0 / 5,0
Wax Castable 100 µm thick parts 5,5 2 30 6 90 / 180 1,0 / 3,0
100 µm thin parts 7,0 2 30 6 60 / 120 2,0 / 3,0
50 µm 4,5 2 30 6 60 / 120 2,0 / 3,0
Premium Flex 100 µm 6,0 2 40 10 60 / 90 2,0 / 3,0
50 µm 5,0 2 30 10 60 / 90 2,0 / 3,0
Clear Impact 100 µm 12,0 2 50 6 90 / 120 2,0 / 3,0
50 µm 10,0 2 40 6 90 / 120 2,0 / 3,0
Strong-X 100 µm 12,0 2 40 6 90 / 240 1,0 / 3,0
50 µm 9,0 2 30 6 90 / 240 1,0 / 3,0
Tough-X 100 µm 16,0 2 50 6 90 / 240 1,0 / 3,0
50 µm 12,0 2 40 6 90 / 240 1,0 / 3,0
Flexible-X 100 µm 14,0 2 50 10 60 / 90 2,0 / 3,0
50 µm 10,0 2 40 10 60 / 90 2,0 / 3,0
Hazard Glow 100 µm 12,0 2 50 6 90 / 240 2,0 / 3,0
Composite-X 100 µm 10,0 2 40 6 90 / 240 1,0 / 3,0
50 µm 8,0 2 30 6 90 / 240 1,0 / 3,0
Dental Model Pro Beige 50 µm 4,5 1 20 6 60 / 240 2,0 / 3,0
Dental Model Pro Grey 50 µm 5,5 1 20 6 60 / 240 2,0 / 3,0
Gingiva Mask 100 µm 14,0 1 30 6 60 / 240 2,0 / 3,0

*all profiles used 6 transition layers, except otherwise noted.

 

Find Elegoo Saturn compatible resin

 

Support settings for Flexible-X, Tough-X and Premium Flex resin on the Elegoo Saturn

Supporting flexible resin and some tough materials, would require extra attention on the Elegoo Saturn. During printing the resin part is very soft and the supports, support tips and intersection with the model should be big enough to support the models during printing. These settings have been used with succes for Flexible-X on the Elegoo Saturn. Tough-X and Premium Flex would require similar support settings.

Elegoo Saturn Resin

 

About the Elegoo Saturn and Elegoo Saturn S resin 3D-printers.

Elegoo Saturn S resin 3D-printer no odor odourless odorless engineering dental jewelry photopolymer resin strong tough flex flexible soft rubber abs-like

Image by Elegoo: The new Elegoo Saturn S compared to the first generation Elegoo Saturn.

 

Elegoo Saturn and Elegoo Saturn S resin 3D-printer specifications

Towards the end of 2021, Elegoo released an upgraded version of the Elegoo Saturn 4K monochrome LCD resin printer. In this paragraph will a comparison of the main parameters of the Saturn S and Saturn can be found.

3D-printer Name Elegoo Saturn S Elegoo Saturn
LCD Screen Size 9.1”  8.9”
XY Resolution in pixels 4098*2560 3840*2400
Size of a pixel 48um / 0.048mm 50um / 0.05mm
LCD Screen Life 2000h 2000h
Build Volume 196*122*210mm (L*W*H) 192*120*200mm (L*W*H)
Printing Speed 30-70mm/h 30-40mm/h
Screen Scratch-resistant Film
Air Purifier ×
FEP film FEP2.0 FEP1.0

 

Small improvements of the Saturn S compared to the original Elegoo Saturn:

  • 1: Increase in LCD size from  from 8.9” to 9.1”.
    2: Increase Z-axis heigth from 200mm to 210mm
    3: Upgrade from FEP1.0 to FEP2.0, the release force is smaller, and the success rate of printing is improved.
    4: New air purifier, fresh printing environment – not needed for most Liqcreate low odor resins

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Liqcreate Strong-X 1KG bottle

    Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Tough-X Impact resin

    Tough-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Flexible-X resin for SLA DLP LCD flexible and elastic 3D printing

    Flexible-X

    Categories:
    EAN: N/A SKU: N/A
    Clear