Rapid Shape GmbH was founded over 10 years ago and build their first 3D-printer back in 2011. its mother company Schultheiss GmbH was active in the jewelry business and did not find any good printing solution on the market at that time. So RapidShape decided to build their own printers. now more than 10 years later Rapid Shape is part of the Straumann group and having build multiple printers for dental, jewelry, hearing aid and industrial purposes. One of their pritners is the Rapid Shape D20+ / Straumann P20+ which offers a flexible and certified resin 3D-printing solution for laboratories through its open material system with validated workflows. The printer is not only characterized by first-class quality, but also by a large printing area and short production times. The optional high-speed Force Feedback technology further reduces your printing times to a minimum. Liqcreate partners optimized some resins on the RapidShape D20+ / Straumann P20+, these materials were processed with open materials settings and the settings can be found here. If you do not have open material settings, then it is not possible to run our resins on the Straumann / Rapid Shape resin printers. Contact us if you need support or have any questions.
| PERFORMANCE PARAMETERS | D20+ | D30+ |
|---|---|---|
| Build volume (L x W x H) | 133 x 75 x 115 mm | 133 x 75 x 155 mm 133 x 75 x 70 mm (ASM active) |
| Native pixel | +/– 34 μm | +/– 34 μm |
| Wavelength | 385 nm | 385 nm |
| Resolution | Full HD | Full HD |
| Dimension (W x D x H) | 335 x 349 x 541 mm | 480 x 410 x 690 mm |
| Connections | Ethernet, WLAN, USB | Ethernet, WLAN, USB |
| Control | 7“ touchscreen | 10“ touchscreen |
Read these instructions first
Partners of Liqcreate have optimized some resins on the Rapid Shape D20+ / Straumann P20+. These materials were printed with open materials settings. The parameters for the open materials settigns can be found in this article. If you do not have open material settings, then it is not possible to run our resins on the Straumann / Rapid Shape resin printers. Contact us if you need support or have any questions.
Rapid Shape D20+ & Straumann P20+ resin 3D-printing parameters.
| Layer thickness | Energy (mJ/dm2) | Offset (micron) | Shrinkage (percent) | Z-compensation (micron) | Burn-in factor (percent) | |
| Dental Model Pro Beige | 50 µm Accurate | 250 | 0 | 0,6 | 100 | 200 |
| 50 µm
Smooth |
450 | 0 | 0,6 | 100 | 200 | |
| Premium White | 100 µm | |||||
| 50 µm | 200 | 0 | 0,6 | 100 | 200 | |
| Deep Blue | 100 µm | |||||
| 50 µm | ||||||
| Stone Coal Black | 100 µm | |||||
| 50 µm | ||||||
| Flexible-X | 100 µm | |||||
| 50 µm | ||||||
| Premium Black | 100 µm | |||||
| 50 µm | ||||||
| Premium Model | 100 µm | |||||
| 50 µm | ||||||
| Premium Tough | 100 µm | |||||
| 50 µm | ||||||
| Wax Castable | 100 µm | |||||
| 50 µm | ||||||
| Clear Impact | 100 µm | |||||
| 50 µm | ||||||
| Tough-X | 100 µm | |||||
| 50 µm | ||||||
| Hazard Glow | 100 µm | |||||
| Composite-X | 100 µm | |||||
| 50 µm |
About the Rapid Shape D20+ / Straumann P20+ resin 3D-printer.
The D20+ supports printing dental parts in small labs to simplify the process. Drill templates, splints, brackets, crowns, dentures and more can be produced without special 3D printing skills. According to Rapid Shape, the open material system as well as the remote control simplify the print material selection and printing process. Printing with consistently high quality and realizing thinner support structures is made possible by our optionally selectable and patented force feedback technology. It measures the forces acting on the part to improve workflow efficiency and shorten delivery time. 
Image by 3dprintingindustry & Rapid Shape: The Rapid Shape D20+ / Straumann P20+ resin 3D-printer.
Rapid Shape D20+ / Staumann P20+ resin 3D-printer specifications.
- Key features of the Rapid Shape D20+ / Straumann P20+
- – Build volume 133 x 75 x 115mm ( L x W x H)
- – Native pixel size +/- 34 micron (Native pixel size is the minimum accuracy feature and in most cases defined as pixel size/2)
- – Wavelength 385nm
- – Resolution Full HD (1080 * 1920 pixels)
Contact us if you have any questions or when you need help with settings for the Rapid Shape D20+ , Straumann P20+ or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
