The Wanhao GR17 (Wanhao Gadoso revolution 1) is a MSLA / LCD based resin 3D-printer, completely open for 3rd party resins. Settings are optimized for some Liqcreate resins. The Liqcreate Premium range is especially developed for printing on these type of MSLA / LCD 3D-printers, leading to significantly shorter exposure times. Other resins can also be processed with higher exposure times. Contact us if you need support or have any questions.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Deep Blue | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Stone Coal Black | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Premium White | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Premium Black | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Premium Model | 100 µm | 16 | 2 burn-in layers of 80 seconds |
| 50 µm | |||
| 35 µm | |||
| Premium Flex | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Premium Tough | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Clear Impact | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Strong-X | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Tough-X | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Flexible-X | 100 µm | ||
| 50 µm | |||
| 35 µm | |||
| Hazard Glow | 100 µm | ||
| 50 µm | |||
| 35 µm |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
About the Wanhao GR1 (Wanhao Gadoso revolution) resin 3D-printer.
Wanhao GR1 (Wanhao Gadoso Revolution) resin 3D-printer specifications.
- – Technology: Direct UV Printing/mSLA/LCD
- – Build Volume: 140x78x180mm
- – Printing Speed: 33 mm / h
- – Layer Thickness: 10-200 microns
- – The Wanhao GR1 has a resolution of 54 microns
- – Power requirement: 100 – 240 V / 1.5 A / 60 Hz / 60 Watt
- – Software: Wanhao Slicer Workshop Mango3D
Contact us if you have any questions or when you need help with settings for the Wanhao GR1 or other resin based 3D-printers.
