The Anycubic Photon Mono X 6Ks resin 3D‑printer represented one of the most refined mid‑format MSLA systems in the desktop market, combining a high‑resolution 6K monochrome LCD with a stable parallel‑matrix 405 nm UV light engine. Designed for precision, throughput, and material flexibility, the Photon Mono X 6Ks offers an open‑material architecture that allows users to run virtually any 405 nm photopolymer—making it an excellent platform for engineering resins, dental model materials, and functional prototyping formulations. Its 9.1‑inch 6K LCD (5760 × 3600 px) delivers a pixel pitch of approximately 34 µm, enabling crisp surface reproduction and dimensional accuracy even on complex geometries. Combined with a reinforced Z‑axis using dual linear rails and an anti‑backlash leadscrew, the printer maintains mechanical stability during long prints and high‑viscosity resin workflows.
From a materials perspective, the Anycubic Photon Mono X 6Ks resin ecosystem is fully compatible with third‑party photopolymers, including some resins from the Liqcreate portfolio. The printer’s optical power output, spectral distribution, and exposure uniformity align well with the curing requirements of Liqcreate engineering resins, dental model resins, elastomeric grades, and high‑performance composites. Because Anycubic’s 6K monochrome LCDs deliver significantly higher UV transmission than older RGB panels, exposure times can be reduced while maintaining polymer conversion, layer adhesion, and mechanical stability. This makes the Photon Mono X 6Ks a strong match for Liqcreate resins that benefit from controlled over‑cure, precise layer stacking, and consistent crosslink density.
In practice, dialing in the correct parameters for the Anycubic Photon Mono X 6Ks resin workflow requires balancing several technical variables: optical irradiance at the vat surface, resin viscosity, photoinitiator sensitivity, pigment load, and the resin’s intrinsic cure depth (Dp) and critical exposure (Ec). Liqcreate materials are engineered with photoinitiator systems optimized for 385–405 nm, ensuring reliable polymerization on the Mono X 6Ks’ 405 nm LED array. However, each resin family—tough, flexible, casting, dental, or high‑temperature—requires specific exposure settings, lift speeds, and support strategies to achieve optimal accuracy and mechanical performance. These parameters are listed in detail below in this article.
Because the Photon Mono X 6Ks shares its optical architecture with other Anycubic monochrome printers, users can often start from baseline settings developed for the Photon M3 Plus or similar models. Nevertheless, the 6K panel’s higher pixel density and slightly different UV throughput mean that fine‑tuning is essential for perfect results. Liqcreate’s validated settings for the Anycubic Photon Mono X 6Ks resin platform provide a reliable foundation for achieving consistent curing, dimensional accuracy, and surface quality across the full range of Liqcreate materials. If you require assistance with calibration, exposure optimization, or resin selection, our technical team is available to help you refine your workflow.
Anycubic Photon Mono X 6Ks resin 3D-printing parameters.
| Layer thickness | % UV Power | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Rest time per step | Lift speed / retract speed (mm/min) | |
| Bio-Med Clear | 100 µm | 80 | 7,0 | 2 | 60 | 7 | 2,0 | 90 / 150 |
| Wax Castable | 30 µm | 60 | 4,0 | 2 | 30 | 6,0 | 2,0 | 1,5 / 2,5 |
*Heavy supports are adviced for Flexible-X and Tough-X
About the Anycubic Photon Mono X 6Ks.
Image by Anycubic: The new Anycubic Photon Mono X 6Ks.
The Anycubic Photon Mono X 6Ks has a 9.1 inch 6K display and a large build volume of 195.84 x 122.4 x 200 mm. With a print volume of 4.76 litres and a build space of 195.84 x 122.4 x 200 mm, you can print larger models as well as multiple smaller parts in one job. The Photon Mono X 6Ks is equipped with a 9.1-inch HD monochrome display with a resolution of 5760 x 3600 pixels and improved contrast ratio (380:1), providing sharper and finer details then previous models.
Contact us if you have any questions or when you need help with settings for the Anycubic Photon Mono X 6Ks or other resin based 3D-printers with Liqcreate 3D-printing resins.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
