The Elegoo Mars LCD 3D printer is an open source printer with a 405 nm light source. The following settings are optimized for Liqcreate resins.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Deep Blue | 100 µm | 35 | First layers 2 x 150 seconds |
| 50 µm | 26 | First layers 2 x 150 seconds | |
| 35 µm | 23 | First layers 2 x 120 seconds | |
| Stone Coal Black | 100 µm | 30 | First layers 2 x 150 seconds |
| 50 µm | 26 | First layers 2 x 150 seconds | |
| 35 µm | 23 | First layers 2 x 120 seconds | |
| Premium White | 100 µm | 14 | First layers 2 x 120 seconds |
| 50 µm | 12 | First layers 2 x 120 seconds | |
| 35 µm | 11 | First layers 2 x 120 seconds | |
| Premium Black | 100 µm | 14 | First layers 2 x 120 seconds |
| 50 µm | 12 | First layers 2 x 120 seconds | |
| 35 µm | 11 | First layers 2 x 120 seconds | |
| Premium Model | 100 µm | 14 | First layers 2 x 120 seconds |
| 50 µm | 12 | First layers 2 x 120 seconds | |
| 35 µm | 11 | First layers 2 x 120 seconds | |
| Premium Flex | 100 µm | 16 | First layers 2 x 120 seconds |
| 50 µm | 14 | First layers 2 x 120 seconds | |
| 35 µm | n/a | ||
| Premium Tough | 100 µm | 16 | First layers 2 x 120 seconds |
| 50 µm | 14 | First layers 2 x 120 seconds | |
| 35 µm | 11 | First layers 2 x 120 seconds | |
| Wax Castable | 100 µm | 13 | First layers 2 x 150 seconds |
| 50 µm | 11 | First layers 2 x 150 seconds | |
| 35 µm | 9 | First layers 2 x 120 seconds | |
| Clear Impact | 100 µm | 35 | First layers 2 x 150 seconds |
| 50 µm | 32 | First layers 2 x 120 seconds | |
| 35 µm | 28 | First layers 2 x 120 seconds | |
| Strong-X | 100 µm | 32 | First layers 2 x 150 seconds |
| 50 µm | 26 | First layers 2 x 150 seconds | |
| 35 µm | 23 | First layers 2 x 150 seconds | |
| Tough-X | 100 µm | 32 | First layers 2 x 150 seconds |
| 50 µm | 25 | First layers 2 x 150 seconds | |
| 35 µm | n/a | ||
| Flexible-X | 100 µm | 26 | First layers 2 x 150 seconds, 2s off-time, use ‘heavy’ supports |
| 50 µm | 24 | First layers 2 x 150 seconds, 2s off-time, use ‘heavy’ supports | |
| 35 µm | n/a | ||
| Hazard Glow | 100 µm | 35 | First layers 2 x 150 seconds |
| 50 µm | |||
| 35 µm |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
