← Support

Printer Settings

Need to know more about printer settings and 3D printer resins by Liqcreate? Look here for your printer settings for our resins with printers by Formlabs, Miicraft, Sprintray, Anycubic, Kudo3D, Cubicon, Wanhao and others.

Which printing settings should be used to print Liqcreate resins on the Beam3D Prism

The Beam3D Prism is a 2K RGB LCD 3Dprinter and is open for 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, no pre-settings are available. Contact us if you need support or have any questions. Contact us Resin Layer thickness Curing time (seconds) Remark Premium [...]

Which printing settings should be used to print Liqcreate resins on the Zortrax Inkspire

The Zortrax Inkspire 3D printer is a low power LCD 3D-printer and completely open for 3rd party resins. Settings are optimized for some Liqcreate resins. Due to the low power of the light source, the Premium resin range works best on this printer. Most other resins could also work on this printer, however, not all [...]