The Anycubic Photon M3 Premium waas only available for a short time and quickly became a capable small-sized MSLA printers for users who need consistent dimensional accuracy, stable curing behavior, and compatibility with a wide range of engineering and dental materials. As part of the M3 platform, the machine is designed around high‑resolution exposure hardware, making it an excellent candidate for fine‑detail Liqcreate materials. Many users searching for Anycubic Photon M3 resin settings discover that the M3 Premium behaves differently from earlier M3 units due to its upgraded optical engine, improved light uniformity, and slightly higher pixel density.
At the core of the Photon M3 Premium is a 10.1‑inch monochrome LCD with a native 8K resolution (7680 × 4320 pixels). This results in a pixel pitch of 28.5 µm, enabling extremely sharp XY reproduction. The printer uses a parallel light matrix with a high‑intensity LED array, engineered to deliver uniform irradiance across the entire build plate. Combined with the monochrome LCD’s high UV transmittance, the system achieves short exposure times even with more viscous or heavily pigmented engineering resins.
The build volume of 219 × 123 × 250 mm provides enough space for dental models, functional prototypes, and small‑batch production parts. The dual‑linear‑rail Z‑axis and precision lead screw reduce Z‑wobble, which is particularly important when printing flexible Liqcreate resins that reveal even minor mechanical inconsistencies. The resin vat includes a replaceable nFEP film, which supports stable peeling forces.
In this article, you will find validated Liqcreate resin settings for the Anycubic Photon M3 Premium, including exposure times, lift speeds, and support recommendations. Only a selection of materials has been fully tested so far, but based on the printer’s optical characteristics and its similarity to other M3‑series machines, all Liqcreate resins are expected to be compatible. Users who want to experiment with non‑validated materials can safely start from the Photon M3 Plus resin settings, as both printers share comparable irradiance levels and LCD transmission behavior.
For users requiring assistance with calibration, exposure tuning, or support optimization for specific Liqcreate materials, technical support is available at info@liqcreate.com.
Anycubic Photon M3 Premium resin 3D-printing parameters.
| Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Rest time per step | Lift speed / retract speed | ||
| Wax Castable | 30 µm | 4,8 | 2 | 40 | 6 | 2,0 | 90 / 120 | |
| Dental Model Pro Beige | 50 µm | 4,5 | 3 | 60 | 8,0 | 2 | 90 / 120 |
* Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
Order Anycubic compatible resin
About Anycubic Photon M3 Premium resin 3D-printer.
Image by Anycubic: The new Anycubic Photon M3 Premium 8K monochrome resin 3D-printer.
Anycubic Photon M3 Premium 3D-printer specifications.
- – Build Volume: 219 x 123 x 250 mm (L x W x H)
- – Light source: Anycubic LighTurb 2.0 Light Source
- – LCD resolution: 8K
- – LCD pixels: 7680 x 4320 pixels
- – Pizel size (XY) : 28.5μm
- – Wavelength: 405 nm
- – Compatible to 3rd party resins: Yes
- – Printing speed: ≤ 95 mm/hr (resin dependant)
Contact us if you have any questions or when you need help with settings for the Anycubic Photon M3 Premium or other resin based 3D-printers when working with Liqcreate photopolymer resin.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
