The Anycubic Photon P1 represents a new direction within Anycubic’s compact MSLA printer range, combining consumer‑level pricing with hardware characteristics typically found in professional systems. Equipped with a high‑intensity 405 nm light engine, a reinforced Z‑axis assembly and a fast‑cycling exposure system, the Photon P1 is designed to deliver stable curing behavior, predictable dimensional accuracy and consistent performance across a wide range of Liqcreate 405 nm materials. These characteristics make the Photon P1 suitable for engineering components, dental models, jewelry patterns and general‑purpose prototyping workflows where repeatability and optical stability are essential.
Thanks to its strong optical output and optimized parallel UV matrix, the Photon P1 can process both fast‑curing standard resins and more demanding engineering or elastomeric materials. Users transitioning from earlier Anycubic systems will notice improved uniformity across the build plate, reduced cure gradients and more reliable layer adhesion—especially when working with flexible, high‑viscosity or high‑energy resin formulations. For users comparing the Photon P1 to larger or more advanced platforms, the Anycubic Photon Mono 4 Ultra and the Anycubic Photon M7 Max provide useful reference points for differences in resolution, irradiance distribution and resin behavior across the Anycubic ecosystem.
If parameters for your resin are not yet available, the validated Photon Mono X settings provide a reliable baseline for dialing in exposure values on the Photon P1. For a broader overview of compatible printers and materials, the Liqcreate resin setting database contains validated parameters for nearly all monochrome MSLA systems, including compact, mid‑range and large‑format printers. For direct assistance with exposure tuning, resin selection or unlisted materials, our engineering team can be reached through the Liqcreate contact page.
Image by Anycubic: The new Anycubic Photon P1 resin 3D-printer.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
Anycubic Photon P1 resin 3D‑printing settings
The following resin parameters have been validated on the Anycubic Photon P1 to ensure stable curing behavior, accurate detail reproduction and consistent dimensional performance across all tested Liqcreate materials. These settings include optimized exposure times, lift speeds, bottom layer behavior and recommended support strategies tailored to the Photon P1’s high‑power light engine and fast‑cycling workflow.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | Wait time per step |
| Flexible-X | 100 µm | 10,0 | 3 | 70 | 10 | 60 / 120 | 2,0 |
| 50 µm | n/a |
About the Anycubic Photon P1 resin 3D‑printer
The Anycubic Photon P1 is built around a new generation of fast‑curing LCD technology, combining a high‑intensity UV matrix with a rigid mechanical platform. The reinforced Z‑axis, optimized vat design and stable optical output contribute to predictable cure depth and reduced variance across the build plate. These characteristics make the Photon P1 a reliable platform for Liqcreate engineering, dental and flexible materials.
Anycubic Photon P1 resin 3D‑printer specifications
The Anycubic Photon P1 features a 9K monochrome LCD, high‑intensity UV matrix and dual‑rail Z‑axis system, resulting in improved optical uniformity and stable curing performance. These hardware specifications contribute to consistent dimensional accuracy and predictable resin behavior across a wide range of Liqcreate 405 nm materials.
| Feature | Specification |
| LCD Type | 7.6‑inch monochrome LCD |
| Resolution | 9K (≈ 8520 × 4320 pixels) |
| XY Pixel Size | 16.8 × 24.8 µm |
| Build Volume | 223 × 126 × 230 mm |
| Light Source | High‑intensity parallel UV matrix (≈ 405 nm) |
| Print Speed | Up to 130 mm/h (material‑dependent) |
| Z‑Axis | Dual linear rails with anti‑backlash nut |
| Connectivity | USB, Wi‑Fi (Anycubic app) |
| Slicer Compatibility | Photon Workshop, third‑party slicers via open profiles |
Support
If you need assistance with resin compatibility, exposure tuning or workflow optimization for the Anycubic Photon P1, our engineering team is available to help. For general guidance across all supported printers, you can refer to the Liqcreate resin setting database. For direct technical support or printer‑specific questions, please reach out through our contact page.
FAQ — Anycubic Photon P1 resin settings and compatibility
Q: Which Liqcreate resins work best on the Anycubic Photon P1?
A: Although few are teste, most Liqcreate resins are technically compatible with the Anycubic Photon P1, including Dental Model Pro, Premium Model, Wax Castable, Strong‑X, Tough‑X and Flexible‑X, when correct exposure settings are applied.
Q: Is the Anycubic Photon P1 suitable for flexible and high‑viscosity resins?
A: Yes, the Anycubic Photon P1 is designed to handle flexible and high‑viscosity resins thanks to its strong light engine, optimized vat design and stable Z‑axis.
Q: How do I find starting settings for Liqcreate resins on the Anycubic Photon P1?
A: Use the Anycubic Photon P1 resin settings in the table as a starting point and fine‑tune exposure time, lift speed and wait time based on part geometry and desired surface quality.
Q: Can I use third‑party slicers with the Anycubic Photon P1?
A: Yes, the Anycubic Photon P1 supports Anycubic Photon Workshop and third‑party slicers via open profiles, allowing you to configure custom settings for Liqcreate resins.
