Support

Liqcreate resins are designed to be compatible with a great number of 3D-printers (385 - 420nm). The printing settings for resin 3D-printing with Liqcreate materials are presented in this article. If there are questions about specific resin 3D-printing parameters, please contact our experts at info@liqcreate.com. The following compatible 3D-printers and settings are available for Liqcreate [...]

The technical data sheet of each Liqcreate resin can be found in this section. All mechanical data is collected according to the measurements explained in this article. Mechanical data of the resin is acquired by 3D printing a sample of the resin and post-processing and post curing it according to the instructions per resin. Mechanical [...]

The Phrozen Sonic Mega 8K V2 resin 3D-printer is an industrial-grade machine designed for large-format, high-resolution 3D printing. It is equipped with a powerful 405 nm light source and a large 15-inch; 8K monochrome LCD panel. Making it compatible with a wide range of third-party 3D printing resins, including Liqcreate materials which are optimized for [...]

3D printing offers unparalleled accuracy and complexity for creating master models, making it the ideal rapid prototyping tool for mold making. However, for those using UV-cured resins in stereolithography (SLA), digital light processing (DLP) or masked stereolithography (MSLA or LCD-type) printers, there is a major chemical hurdle: platinum cure silicone inhibition. This issue is notorious [...]

The contact angle is a fundamental measure of surface wettability—the tendency of a liquid to spread on or adhere to a solid surface. It is defined as the angle, measured through the liquid, at the point where the liquid-vapor interface meets the solid surface. This angle provides crucial insight into the surface energy and the [...]