The Phrozen Sonic Mini 8K S is a cost‑optimized variant of the original Sonic Mini 8K, designed to maintain high‑resolution performance while simplifying the mechanical structure. The most notable change is the transition from a dual‑rail to a single‑rail Z‑axis, while the 7.1‑inch 8K monochrome LCD and optical characteristics remain consistent with the earlier model. This makes the Mini 8K S suitable for users who require fine detail reproduction at a more accessible price point. For a full overview of all validated materials, visit the Liqcreate resin parameter database.
Within the Mini‑series, the Mini 8K S shares its general workflow, build volume, and resin behavior with the other compact Phrozen printers. You can navigate between the different models and their resin settings and parameters using the following pages: Phrozen Sonic Mini resin settings, Phrozen Sonic Mini 4K exposure parameters and Phrozen Sonic Mini 8K resin parameters. These pages provide a consistent overview of validated Liqcreate exposure values across the entire Mini‑series. The Phrozen Sonic Mini 8K S resin parameters on this page are validated specifically for this model. You can also review printer settings across the Mini‑series to compare exposure behavior between models.
All validated Liqcreate resin settings for the Sonic Mini 8K S are listed below. If you require assistance with exposure tuning, workflow optimization, or troubleshooting, you can contact us for support at info@liqcreate.com. You can also Download the Chitubox parameter file for Phrozen Sonic Mini 8K S Liqcreate resin to import all Liqcreate resin profiles into the slicer within seconds.
Phrozen Sonic Mini 8K S resin parameters
The Phrozen Sonic Mini 8K S uses a cost‑optimized mechanical design while maintaining the same 7.1‑inch 8K monochrome LCD and optical characteristics as the original Mini 8K. Due to its single‑rail Z‑axis and slightly reduced structural rigidity, exposure behavior can differ subtly from the earlier dual‑rail model, especially when working with engineering‑grade or highly pigmented resins. The resin parameters listed below are validated specifically for the Mini 8K S to ensure consistent cure depth, dimensional accuracy, and surface detail across the full range of Liqcreate materials.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Rest time in every step (seconds) |
| Bio-Med Clear | 100 µm | 10,0 | 1 | 35 | 6,0 | 90 / 120 | 2,0 |
| 50 µm* | 7,0 | 1 | 30 | 6,0 | 90 / 120 | 2,0 | |
| Stone Coal Black | 100 µm | 9,0 | 2 | 60 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 7,0 | 2 | 50 | 6,0 | 90 / 120 | 2,0 | |
| Deep Blue | 100 µm | 13,0 | 2 | 60 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 11,0 | 2 | 50 | 6,0 | 90 / 120 | 2,0 | |
| Premium White | 100 µm | 3,0 | 2 | 30 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 2,0 | 2 | 25 | 6,0 | 90 / 120 | 2,0 | |
| Premium Black | 100 µm | 5,0 | 2 | 40 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 4,0 | 2 | 30 | 6,0 | 90 / 120 | 2,0 | |
| Premium Model | 100 µm | 5,0 | 1 | 20 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 4,0 | 1 | 20 | 6,0 | 90 / 120 | 2,0 | |
| Premium Tough | 100 µm | 8,0 | 2 | 20 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 6,0 | 2 | 20 | 6,0 | 90 / 120 | 2,0 | |
| Wax Castable | 100 µm | 6,0 | 1 | 60 | 6,0 | 90 / 150 | 2,0 |
| 50 µm | 4,0 | 1 | 50 | 6,0 | 90 / 150 | 2,0 | |
| 25 µm | 3,0 | 1 | 45 | 6,0 | 90 / 150 | 2,0 | |
| Premium Flex** | 100 µm | 5,0 | 2 | 20 | 10,0 | 60 / 120 | 2,0 |
| 50 µm | 4,0 | 2 | 20 | 10,0 | 60 / 120 | 2,0 | |
| Clear Impact | 100 µm | 11,0 | 2 | 50 | 6,0 | 90 / 150 | 2,0 |
| 50 µm | 9,0 | 2 | 50 | 6,0 | 90 / 150 | 2,0 | |
| Strong-X | 100 µm | 10,0 | 2 | 50 | 6,0 | 90 / 150 | 2,0 |
| 50 µm | 8,0 | 2 | 40 | 6,0 | 90 / 150 | 2,0 | |
| Tough-X** | 100 µm | 14,0 | 2 | 50 | 8,0 | 60 / 90 | 2,0 |
| 50 µm | 12,0 | 2 | 40 | 8,0 | 60 / 90 | 2,0 | |
| Flexible-X** | 100 µm | 14,0 | 2 | 60 | 10,0 | 60 / 90 | 2,0 |
| 50 µm | 12,0 | 2 | 50 | 10,0 | 60 / 90 | 2,0 | |
| Elastomer-X** | 100 µm | 16,0 | 2 | 60 | 10,0 | 60 / 90 | 2,0 |
| 50 µm | 14,0 | 2 | 50 | 10,0 | 60 / 90 | 2,0 | |
| Hazard Glow | 100 µm | 10,0 | 2 | 60 | 6,0 | 90 / 120 | 2,0 |
| Composite-X | 100 µm | 7,0 | 2 | 40 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 5,0 | 2 | 40 | 6,0 | 90 / 120 | 2,0 | |
| Flame Retardant HDT | 100 µm | 7,0 | 2 | 30 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 5,0 | 2 | 25 | 6,0 | 90 / 120 | 2,0 | |
| Rigid Pro | 100 µm | 7,0 | 2 | 30 | 6 | 90 / 120 | 2,0 |
| 50 µm | 5,0 | 2 | 20 | 6 | 90 / 120 | 2,0 | |
| ESD | 100 µm | 9,0 | 2 | 60 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 7,0 | 2 | 50 | 6,0 | 90 / 120 | 2,0 | |
| Dental Model Pro Beige | 100 µm | 5,5 | 1 | 20 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 4,5 | 1 | 20 | 6,0 | 90 / 120 | 2,0 | |
| Dental Model Pro Grey | 100 µm | 6,0 | 1 | 25 | 6,0 | 90 / 120 | 2,0 |
| 50 µm | 5,0 | 1 | 20 | 6,0 | 90 / 120 | 2,0 | |
| Gingiva Mask | 100 µm | 10,0 | 2 | 30 | 10 | 60 / 90 | 2,0 |
| 50 µm | 8,0 | 2 | 30 | 10 | 60 / 90 | 2,0 | |
| Separation Model | 100 µm | 6,0 | 1 | 25 | 6 | 90 / 120 | 2,0 |
| 50 µm | 4,0 | 1 | 20 | 6 | 90 / 120 | 2,0 |
These mechanical and structural differences explain why the Mini 8K S may require slightly adjusted exposure settings compared to the original Mini 8K. Note: All profiles with a star used 15 transition layers, all others used 6 transition layers. Tough-X, Flexible-X, Gingiva Mask and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
About the Phrozen Sonic Mini 8K S resin 3D-printer
The Phrozen Sonic Mini 8K S is a compact high‑resolution MSLA system that combines an 8K monochrome LCD with a simplified single‑rail Z‑axis design, resulting in consistent fine‑detail performance while maintaining a cost‑optimized mechanical structure.
Image by Phrozen: the new Phrozen Sonic Mini 8K S resin 3D-printer.
Phrozen Sonic Mini 8K vs Mini 8K S resin 3D-printer
The Phrozen Sonic Mini 8K and Mini 8K S share the same 7.1‑inch 8K monochrome LCD and optical engine, while differing in Z‑axis construction and mechanical stability, resulting in subtle variations in exposure behavior and resin performance between the two systems.
| Sonic Mini 8K S | Sonic Mini 8K | |
| Device size | 290x290x430mm 290x290x430mm | |
| Device weight | 10 kg | 13 kg |
| Build volume | 165 x 72 x 170 mm | 165 x 72 x 180 mm |
| XY resolution | 22 μm 22 μm | |
| Rails | One Linear Rail | Two Linear Rails |
| Slicer software | VoxelDance Tango | CHITUBOX V1.9.0+ |
| Black housing | Textured | Smooth Matt |
| Plastic Cover | Neon green | Orange |
The Mini 8K S fits within the broader Phrozen Mini‑series, which shares similar build volumes and resin behavior across all models.
For cross‑printer exposure differences and LCD‑specific curing behavior, visit the Phrozen Sonic Mini exposure settings page.
→ Back to the Phrozen Sonic Mini‑series resin overview
Support
Contact us if you have any questions or require assistance with resin settings for the Phrozen Sonic Mini 8K S or any other resin‑based 3D‑printer when working with Liqcreate materials.
Phrozen Sonic Mini 8K S – Frequently Asked Questions
Q1: Can I use Phrozen Sonic Mini 8K exposure settings on the Mini 8K S? No. Although both printers use the same 7.1‑inch 8K monochrome LCD, the Mini 8K S has a single‑rail Z‑axis, which can influence stability and exposure behavior. Always use Mini 8K S‑specific resin parameters.
Q2: Does the Mini 8K S require different support structures? Yes. Due to the simplified Z‑axis design, some engineering‑grade or flexible Liqcreate resins may require heavier or denser support structures to maintain dimensional accuracy.
Q3: Are all Liqcreate resins compatible with the Mini 8K S? Yes. All Liqcreate materials can be used on the Mini 8K S, provided the correct exposure settings, lift speeds, and support strategies are applied.
Q4: Why do some resins need higher exposure times on the Mini 8K S? The single‑rail Z‑axis can introduce slight differences in layer stability compared to the dual‑rail Mini 8K. Higher exposure times ensure consistent cure depth and surface detail.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
