Elegoo launched their slightly larger Saturn S some time after the regular Saturn. The Saturn S is quite identical, with a 4K Monochrome LCD screen and operating at 405 nm light source. Learn about the different Elegoo Saturn and mars 3d-printers here or on the official Elegoo Saturn website. All Liqcreate resins are compatible with the original Elegoo Saturn. For the Saturn S there are some parameters. In case you want to work with a non-validated resin, a good starting point intesting are the Elegoo Saturn resin settings in the link. Contact us if you need support or have any questions.
|Exposure time (seconds)
|Base layer count
|Base layer exposure
|Lift speed / retract speed (mm/min)
|Light off-delay / bottom (seconds)
|90 / 120
For not tested resins, the original Elegoo Saturn resin parameters are a good starting point.
** All profiles used 6 transition layers, except otherwise noted.
About the Elegoo Saturn and Elegoo Saturn S resin 3D-printers.
Image by Elegoo: The new Elegoo Saturn S compared to the first generation Elegoo Saturn.
Elegoo Saturn and Elegoo Saturn S resin 3D-printer specifications
Towards the end of 2021, Elegoo released an upgraded version of the Elegoo Saturn 4K monochrome LCD resin printer. In this paragraph will a comparison of the main parameters of the Saturn S and Saturn can be found.
|Elegoo Saturn S
|LCD Screen Size
|XY Resolution in pixels
|Size of a pixel
|48um / 0.048mm
|50um / 0.05mm
|LCD Screen Life
|Screen Scratch-resistant Film
Team Liqcreate wishes you happy printing! in case you have any questions about working with Liqcreate resins on the Elegoo Saturn S or any other resin based 3D-printer, don’t hestitate to contact us at email@example.com
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!