The Phrozen Sonic Mighty Revo 16K is the newest system in the Mighty‑series and introduces a 16K monochrome LCD with increased pixel density, updated irradiance distribution and a reinforced mechanical platform. Its workflow, exposure characteristics and curing behavior align closely with the Mighty 4K, Mighty 8K, Mighty 12K and Mighty Revo 14K platforms. Users working across multiple systems can compare printer‑specific exposure behavior through the Phrozen Sonic Mighty‑series resin overview.
The Mighty Revo 16K features a new optical engine and higher‑resolution LCD compared to previous models. Due to these changes, Liqcreate is validating full resin exposure profiles for each material family. Initial test data is available for selected materials, and additional settings will be added as validation progresses.
For users requiring broader material coverage or cross‑platform comparisons, all resin families and exposure profiles are available in the Liqcreate resin parameter database. If you need assistance with exposure optimization, workflow setup or troubleshooting for the Mighty‑series or any other resin‑based 3D‑printer, you can contact Liqcreate technical support.
Validated Liqcreate resin settings for the Phrozen Sonic Mighty Revo 16K
Below are the initial validated exposure parameters for the Mighty Revo 16K. These values are based on controlled testing with the 16K LCD, updated optical engine and standard Liqcreate workflows.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Rest time in every step (seconds) |
| Rigid Pro | 100 µm | 6,0 | 2 | 30 | 5 | 90 / 120 | 2,0 |
| 50 µm | 4,5 | 2 | 30 | 5 | 90 / 120 | 2,0 | |
| Stone Coal Black | 100 µm | 6,5 | 2 | 60 | 5 | 90 / 120 | 2,0 |
| 50 µm | 5,5 | 2 | 50 | 5 | 90 / 120 | 2,0 |
Additional materials will be added as validation progresses. All exposure values are tested using standard Liqcreate workflows.
About the Phrozen Sonic Mighty Revo 16K resin 3D‑printer
The Phrozen Sonic Mighty Revo 16K is a mid‑format MSLA 3D‑printer equipped with a high‑resolution 16K monochrome LCD, making it a 16K LCD 3D‑printer with an updated optical engine designed for uniform irradiance and stable curing behavior. Its reinforced Z‑axis assembly and optimized light distribution support stable layer formation. The increased pixel density improves dimensional accuracy and surface detail across engineering and general‑purpose photopolymers. Within the Mighty‑series workflow, the Revo 16K maintains consistent mechanical behavior and predictable curing performance.
Optical engine and pixel density
The updated optical engine provides uniform irradiance across the build area, supporting consistent exposure behavior for engineering and functional materials. The 16K LCD increases pixel density compared to previous Mighty‑series systems, enabling finer XY detail and improved surface quality. This combination enhances dimensional stability and supports reliable curing performance across Liqcreate resin families.
Phrozen Sonic Mighty Revo 16K resin 3D‑printer specifications
The Phrozen Sonic Mighty Revo 16K is a mid‑format MSLA resin 3D‑printer with a 16K monochrome LCD, fine XY resolution and a build volume suitable for miniature production, functional parts and small‑batch workflows. The combination of 14 × 19 µm XY resolution, a 10.1‑inch LCD and a 211.68 × 118.37 × 235 mm build volume positions it as a high‑detail system within the Mighty‑series.
Core specifications
- – LCD type: 10.1‑inch 16K monochrome LCD
- – LCD resolution: 15,120 × 6,230 pixels
- – XY resolution: 14 × 19 µm
- – Build volume (L × W × H): 211.68 × 118.37 × 235 mm
- – Z‑axis system: Dual linear rails with ball screw
- – Layer height range: 0.01–0.30 mm
- – Maximum print speed: up to 70 mm/h (resin dependant)
- – Light source: 405 nm ParaLED light engine
- – Control system: Phrozen OS with 5‑inch touch panel
- – Connectivity: USB, network‑enabled (via Phrozen GO ecosystem)
- – Slicer compatibility: CHITUBOX and other compatible slicers
Functional features
- – Built‑in 30 °C chamber heater
- – Dual smart failure detection (foreign object detection and part detachment alert)
- – Assisted leveling
- – Internal lighting and enclosed chamber
- – Activated carbon air filtration and leak‑prevention design
Cross‑compatibility within the Mighty‑series
While the Mighty Revo 16K introduces a new optical configuration, its curing behavior remains broadly aligned with other Mighty‑series systems. Users working across multiple printers can reference the following characteristics when tuning workflows:
Mighty Revo 14K — closest match in optical behavior and irradiance distribution
Mighty 12K — reliable baseline for engineering resins and dimensional accuracy
Mighty 8K — similar curing depth and stable performance for general‑purpose materials
These references are intended for preliminary workflow tuning only. Validated Mighty Revo 16K exposure settings should always be used when available.
Support
If you need assistance with exposure tuning, workflow optimization or troubleshooting for the Mighty Revo 16K or any other resin‑based 3D‑printer, our engineering team can help. Contact Liqcreate technical support.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
