Support > Printer Settings

Resin 3D-printing parameters for the Phrozen Sonic Mighty 4K

The Phrozen Sonic Mighty 4K LCD / MSLA 3D-printer is a monochrome 3d-printer with a 405 nm light source, compatible with 3rd party resin. The following settings are optimized for Liqcreate resin. In most cases the settings from the Phrozen Sonic Mini 4K work on the Phrozen Sonic Mighty 4K as well. These settings are published here. Contact us if you need support or have any questions.

Chitubox settings / 3D-printing parameters can be downloaded here and imported in your Chitubox with one click to get all Liqcreate parameters at once for this printer.

Contact us

 

Phrozen sonic mighty 4K resin 3D-printing parameters

Resin Layer thickness Exposure time (seconds) Base layer count Base layer exposure Lift Height Off-time / bottom layer Lift speed / retract speed
Strong-X 100 µm 15,0 2 60 8 1,0 / 3,0 60 / 90
50 µm 11,0 1 50 8 1,0 / 3,0 60 / 90
ESD 100 µm 18,0 2 40 8 1,0 / 3,0 60 / 90
50 µm 16,0 2 35 8 1,0 / 3,0 60 / 90
Flexible-X 100 µm 14,0 2 90 10 1,0 / 3,0 60 / 90
50 µm 12,0 2 85 10 1,0 / 3,0 60 / 90
Elastomer-X 100 µm  regular 22 2 60 10 2,0 / 2,0 60 / 90
50 µm regular 20 2 50 10 2,0 / 2,0 60 / 90
100 µm thin 26 2 60 10 2,0 / 2,0 60 / 90
50 µm thin 23 2 50 10 2,0 / 2,0 60 / 90
Deep Blue 100 µm 12,0 2 50 8 1,0 / 3,0 90 / 150
50 µm 10,0 2 40 8 1,0 / 3,0 90 / 150
Stone Coal Black 100 µm 11,0 2 50 8 1,0 / 3,0 90 / 150
50 µm 9,0 2 40 8 1,0 / 3,0 90 / 150
Premium White 100 µm 5,5 2 40 8 1,0 / 3,0 90 / 150
50 µm 4,1 6 30 8 1,0 / 3,0 90 / 150
Premium Black 100 µm 6,5 2 40 8 1,0 / 3,0 90 / 150
50 µm 5,1 6 30 8 1,0 / 3,0 90 / 150
Premium Model 100 µm 5,0 2 40 8 1,0 / 3,0 90 / 150
50 µm 4,1 6 30 8 1,0 / 3,0 90 / 150
Premium Tough 100 µm 6,5 6 20 8 1,0 / 3,0 90 / 150
50 µm 5,5 6 20 8 1,0 / 3,0 90 / 150
Wax Castable 100 µm 6,0 2 40 8 1,0 / 1,0 90 / 120
50 µm 5,0 2 30 8 1,0 / 1,0 90 / 120
35 µm 4,0 2 25 8 1,0 / 1,0 90 / 120
Premium Flex 100 µm 5,0 2 40 10 2,0 / 2,0 60 / 90
50 µm 4,0 2 30 10 2,0 / 2,0 60 / 90
Clear Impact 100 µm 16,0 2 60 8 1,0 / 3,0 90 / 150
50 µm 14,0 2 50 8 1,0 / 3,0 90 / 150
Tough-X 100 µm 17,0 2 60 10 1,0 / 3,0 60 / 90
50 µm 15,0 2 50 10 1,0 / 3,0 60 / 90
Hazard Glow 100 µm 13,0 2 60 8 2,0 / 2,0 90 / 120
Bio-Med Clear 100 µm 9,0 2 45 8 2,0 / 2,0 90 / 120
50 µm 7,0 2 40 8 2,0 / 2,0 90 / 120
Composite-X 100 µm 9,0 2 60 8 2,0 / 2,0 90 / 120
50 µm 7,0 2 50 8 2,0 / 2,0 90 / 120
Dental Model Pro Beige 100 µm 7,5 2 65 8 2,0 / 2,0 90 / 120
50 µm 5,5 2 70 8 2,0 / 2,0 90 / 120
Dental Model Pro Grey 100 µm 7,5 2 65 8 2,0 / 2,0 90 / 120
50 µm 5,5 2 70 8 2,0 / 2,0 90 / 120
Gingiva Mask 100 µm 16,0 2 30 10 2,0 / 3,0 60 / 60
50 µm 14,0 2 25 10 2,0 / 3,0 60 / 60

*all profiles used 6 transition layers, except otherwise noted.

 

Find Phrozen Sonic compatible resin

 

About the Phrozen Sonic Mighty 4K resin 3D-printer.

With an extended printing area of 9.3″ and a 22cm Z-axis, the Phrozen Sonic Mighty 4K resin 3D-printer empowers makers to print larger and more ambitious builds that match your exact designs. But that’s not all. Sonic Mighty 4K prints models in 4K quality, offers high-resolution printing at 52µm, and brings your most ambitious creations to life with crazy detail.

Phrozen Sonic Mighty 4K resin photopolymer resins liqcreate engineering jewelry dental flex flexible elastomer tough ABS-like strong low odor

Image by Phrozen3D: The Phrozen resin 3D-printer line-up with on the left the Phrozen Sonic Mighty 4K resin 3D-printer.

Phrozen Sonic Mighty 4K resin 3D-printer specifications.

  • – System: Phrozen OS
  • – Operation: 2.8in Touch Panel
  • – Slicer Software: CHITUBOX
  • – Connectivity: USB
  • – Technology: Resin 3D Printer – LCD Type
  • – LCD Specification:  9.3″ 4K Mono LCD
  • – Light Source: 405nm ParaLED Matrix 2.0
  • – XY Resolution: 52 µm
  • – Layer Thickness: 0.01-0.30mm
  • – Maximum Printing Speed: 80mm/ hour
  • – Power Requirement: AC100-240V~50/60Hz
  • – Build Volume: 20 x 12.5 x 22 cm
  • – Printer Weight: 8 kg

Contact us if you have any questions or when you need help with settings for the Phrozen or other resin based 3D-printers.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Liqcreate Strong-X 1KG bottle

    Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Wax Castable for casting objects using LCD/MSLA, DLP and SLA 3D printing

    Wax Castable

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Bio-Med Clear 1KG bottle no shade 939x939

    Bio-Med Clear

    Categories:
    EAN: N/A SKU: N/A
    Clear