Recently we discussed that Elegoo announced a new resin 3D-printer based on DLP technology. This is a move from the technology that they are very familiar with, LCD or MSLA 3d-printers. This is about one and a half years after Anycubic launched its first resin DLP 3D-printer on Kickstarter. Learn more about the Elegoo Mars 4 DLP, compatible resins and 3D-printing parameters.
Please note that there are four different Elegoo Mars 4 resin printers. this article is specifically for the Elegoo Mars 4 DLP version and not the Mars 4, Elegoo Mars 4 Ultra and Elegoo Mars 4 Max, which are all LCD based MSLA printers.
Elegoo Mars 4 DLP resin 3D-printing parameters
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Off-time / bottom layer | Lift speed / retract speed |
| Strong-X | 100 µm | ||||||
| 50 µm | |||||||
| Flexible-X | 100 µm | ||||||
| 50 µm | |||||||
| Deep Blue | 100 µm | ||||||
| 50 µm | |||||||
| Stone Coal Black | 100 µm | ||||||
| 50 µm | |||||||
| Premium White | 100 µm | ||||||
| 50 µm | |||||||
| Premium Black | 100 µm | ||||||
| 50 µm | |||||||
| Premium Model | 100 µm | ||||||
| 50 µm | |||||||
| Premium Tough | 100 µm | ||||||
| 50 µm | |||||||
| Wax Castable | 100 µm | ||||||
| 50 µm | 3,5 | 2 | 60 | 8 | 2,0 / 2,o | 90 / 150 | |
| Flexible-X | 100 µm | ||||||
| 50 µm | |||||||
| Clear Impact | 100 µm | ||||||
| 50 µm | |||||||
| Tough-X | 100 µm | ||||||
| 50 µm | |||||||
| Hazard Glow | 100 µm | ||||||
| Composite-X | 100 µm | ||||||
| 50 µm |
Elegoo Mars 4 DLP comparison with the Anycubic Photon D2 DLP.
There is not that much of information online, but some key metrics are available and listed below.
| Elegoo Mars 4 | Anycubic Photon Ultra D2 | |
| DLP Chipset | 2K | 2K |
| Pixels | 2560 * 1440 | 2560 * 1440 |
| Print size (L x W x H) | 132* 74.7 * 150 mm | 131 * 73 * 165 mm |
| Pixel size | ~0,080 mm | 0,051 mm |
| Light intensity | 4mW/cm2* | 3mW/cm2* |
- * light intensity of the Elegoo Mars 4 is from the manufacturers marketing material while the Anycubic Photon D2 was measured at the Liqcreate R&D laboratory.
About the Elegoo Mars 4 DLP resin 3D-printing technology
Digital Light Processing (DLP) is using a digital light projector to expose the entire layer image to the bottom of the resin tank. By utilizing a micromirror device (DMD) to selectively project the UV light onto the given position to be cured. Elegoo DLP projector adopts the LG high-performance LED light source + 13-layer lens set design, with light intensity up to 4mw/cm2 and light uniformity up to 95%, coupled with 95% light transmittance tempered glass, which minimizes light scattering and light bleed. The result is greater print accuracy than LCD 3D printers with the same resolution.
Image by Elegoo: representation how the DLP module works inside the Elegoo Mars 4 DLP resin 3D-printer.
If there are any questions about working with Liqcreate resin on the Elegoo MArs 4 DLP resin 3D-pronter, feel free to contact us at info@liqcreate.com any time.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
