Support > Printer Settings

Resin 3D-printing settings for Anycubic Photon Mono-X

The Anycubic Photon Mono-X is an 4K monochrome LCD / MSLA resin 3D-printer. The Anycubic Photon Mono-X is compatible with Liqcreate resinsThe following settings are optimized for Liqcreate resin. Due to its monochrome LCD screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. More information about the differences between the Anycubic Photon Mono-X and other Anycubic Photon resin 3D-printers can be found hereContact us if you have any questions about the resin or Photon Mono-X settings.

Download the Chitubox settings for the Anycubic Photon Mono-X here.

 

Anycubic Photon Mono-X resin settings

Resin Layer thickness % UV Power Exposure time (seconds) Base layer count Base layer exposure Lift Height (mm) Lift speed / retract speed (mm/min)
Deep Blue 100 µm 100 9,0 2 75 6 90 / 240
50 µm 100 5,0 2 60 6 90 / 240
Stone Coal Black 100 µm 100 9,0 2 75 6 90 / 240
50 µm 100 5,0 2 60 6 90 / 240
Premium White 100 µm 50 5,0 2 65 6 90 / 240
50 µm 50 3,0 2 65 6 90 / 240
Premium Black 100 µm 100 2,0 2 75 6 90 / 240
50 µm 100 1,7 2 75 6 90 / 240
Premium Model 100 µm 60 4,0 1 35 6 60 / 240
50 µm 60 2,5 1 35 6 60 / 240
Premium Tough 100 µm 65 9,0 2 50 6 90 / 240
50 µm N/a
Wax Castable 100 µm 60 3,7 2 60 6 90 / 240
50 µm 60 3,0 2 60 6 90 / 240
25 µm
Premium Flex* 100 µm 60 6,0 1 75 10 90 / 240
50 µm N/a
Clear Impact 100 µm 60 11,0 2 75 6 90 / 240
50 µm 60 9,0 2 75 6 90 / 240
Strong-X 100 µm 100 9,0 2 75 6 90 / 240
50 µm 100 5,0 2 60 6 90 / 240
ESD 100 µm 100 7,0 2 50 6 90 / 240
50 µm 100 6,0 2 40 6 90 / 240
Tough-X* 100 µm 100 15,0 1 80 6 90 / 240
50 µm 100 12,0 1 80 6 90 / 240
Flexible-X* 100 µm 100 13,0 2 75 10 90 / 150
50 µm 100 N/a
Elastomer-X* 100 µm regular 100 16,0 2 80 10 90 / 150
100 µm thin 100 20,0 2 80 10 90 / 150
Hazard Glow 100 µm 100 10,0 2 80 6 90 / 240
Composite-X 100 µm 90 7,5 2 80 6 90 / 240
50 µm 90 6,5 2 80 6 90 / 240
Flame Retardant 100 µm 100 4,5 2 40 6 90 / 240
HDT 50 µm 100 3,5 2 40 6 90 / 240
Bio-Med Clear 100 µm 100 4,0 2 40 6 90 / 240
50 µm 100 3,5 2 35 6 90 / 240
Dental Model Pro Beige 50 µm 100 3,5 1 60 6 42 / 240
Dental Model Pro Grey 50 µm 100 3,5 1 60 6 42/ 240
Gingiva Mask 100 µm 100 14,0 6 30 8 42 / 240

** Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.

 

Liqcreate Composite-X 3D-printed on Anycubix Photon Mono-X 3D-printer engineering resin

Engineering part of Liqcreate Composite-X resin 3D-printed on an Anycubic Photon Mono-X.

 

About the Anycubic Photon Mono X resin 3D-printer

resin anycubic photon mono x engineering dental jewelry casting wax flex elastic flexible tough soft rubber photopolymer resins liqcreate

Image by 3Dprintingindustry.com and Anycubic: The line of Anycubic Photon monochrome resin LCD 3D-printers.

 

Anycubic Photon Mono X resin 3D-printer specifications

4K monochrome LC: D The Anycubic Photon Mono X is one of the first 8.9 inch LCD printers to have a newly developed 4K monochrome LCD display. With this new technology, the Photon Mono X prints at unbelievable printing speeds so that it only needs a few seconds per layer. The monochrome LCD is also thermally stable and has a much longer service life than conventional LCD displays. it is advertised that you can print up to over 2000 hours with it! Despite the fairly large buid volume, the Anycubic Photon Mono X has a very high precision of up to 50 microns, which is achieved due to the 4K LCD screen resolution.

New matrix light source: The new matrix light source has been redesigned and consists of several UV LED lights that have a more even exposure. This not only improves accuracy but also enables faster exposure times and better heat dissipation.

Dual linear rail: With the enlarged building platform, increased stability is also a very important addition. Following the trend of its smaller LCD counterparts, the Photon Mono X has two linear rails on its vertical axis to ensure that the build platform remains level throughout the printing process.

UV cooling system: An integrated cooling system for the UV exposure unit to increase printing performance and service life.

Other features:

  • – Qualitative power supply
  • – Automatic shut down when opening the top cover
  • – 3.5-inch touchscreen
  • – Details down to 50 microns
  • – Wifi module
  • – Stable Z-axis
  • – Structured platform for better adhesion
  • – Marking in the metal resin tank for max. Capacity

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Liqcreate Strong-X 1KG bottle

    Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Wax Castable for casting objects using LCD/MSLA, DLP and SLA 3D printing

    Wax Castable

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Flexible-X resin for SLA DLP LCD flexible and elastic 3D printing

    Flexible-X

    Categories:
    EAN: N/A SKU: N/A
    Clear