Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Creality LD-002H?

The Creality LD-002H 2K Monochrome LCD/MSLA 3D-printer is an open printer with a 405 nm light source. The Creality LD-002H is completely open for 3rd party resins. Due to its monochrome screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.

 

Contact us

 

Resin Layer thickness Curing time (seconds) Remark
Composite-X 100 µm 4,0 2 base layers of 60 seconds
Premium Black 100 µm
50 µm 2,0 2 base layers of 60 seconds
Deep Blue 100 µm
50 µm
Stone Coal Black 100 µm
50 µm
Premium White 100 µm
50 µm
Premium Model 100 µm
50 µm
Premium Flex 100 µm
50 µm
Premium Tough 100 µm
50 µm
Clear Impact 100 µm
50 µm
Strong-X 100 µm
50 µm
Tough-X 100 µm
50 µm
Flexible-X 100 µm
50 µm
Hazard Glow 100 µm

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Tough-X Impact resin

    Tough-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Resin Cleaner SLA DLP LCD 3D printer

    Resin Cleaner

    Categories:
    EAN: 8720256386063 SKU: LRC0X000
    Clear