Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Cubicon Lux and Cubicon HD?

The Cubicon Lux & Lux HD are a high-end DLP 3D-printers and completely open to 3rd party resins. Initial testing has been done with Liqcreate Deep Blue resin which lead to the settings shown below. Due to the curing nature of the other resins, a preliminary setting has been released as a starting point for further optimization.

Resin Layer thickness Settings Remark
Deep Blue 100 µm 5,5 seconds Layer settings below
Stone Coal Black 100 µm 8 seconds Preliminary setting
Premium White 100 µm
Premium Black 100 µm
Clear Impact 100 µm 8 seconds Preliminary setting
Strong-X 100 µm 8 seconds
Hazard Glow 100 µm 8 seconds Preliminary setting

Printing settings Cubicon Lux & Lux HD

printer settings cubicon lux & lux HD for Liqcreate resins

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us