The Elegoo Jupiter is a 6K Monochrome LCD/MSLA resin 3D-printer. The Elegoo Jupiter is equipped with a 405 nm light source and is compatible with 3rd party resin. Learn about the different Elegoo Saturn and mars 3d-printers here or on the official Elegoo Saturn website. Thanks to our partner 3D Dental Store for sharing the 3D-printing parameters. It is expected that resins that are not listed are also compatible with the Elegoo Jupiter. As there are no settings available yet, it can take some tries to get it to run smoothly. Contact us when we can help you with optimizing or if you have any questions.
Elegoo Jupiter resin 3D-printing settings
|Resin||Layer thickness||Exposure time (seconds)||Base layer count||Base layer exposure||Lift Height||Lift speed / retract speed (mm/min)||Light off-delay / bottom (seconds)|
|Deep Blue||100 µm|
|Stone Coal Black||100 µm|
|Premium White||100 µm|
|Premium Black||100 µm|
|Premium Model||100 µm|
|50 µm||4,3||1||35||7||60 / 120||2,0 / 2,0|
|Premium Tough||100 µm|
|Wax Castable||100 µm|
|Premium Flex*||100 µm|
|Clear Impact||100 µm|
|Strong-X||100 µm||12,0||2||40||10||60 / 120||2,0 / 2,0|
|Hazard Glow||100 µm|
|Dental Model Pro Beige||50 µm|
|Dental Model Pro Grey||50 µm|
|Gingiva Mask||100 µm|
* Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
** All profiles used 4 transition layers, except otherwise noted.
About the Elegoo Saturn and Elegoo Saturn S resin 3D-printers.
Image by Elegoo during the Jupiter kickstarter campaign: The new Elegoo Jupiter, large format 6K MSLA resin 3D-printer.
Elegoo Jupiter resin 3D-printer specifications
Thanks to its large 12.8-inch LCD screen, you will be able to print almost twice as many models as with an Elegoo Saturn.
- – Slicer: ChituBox
- – Technology: LCD UV curing
- – Interface: 5.0 inch capacitive screen
- – Connectivity: USB
- – Layer thickness: from 0.01 to 0.2mm
- – Printing speed: between 30 and 70mm/h depending on the resins (according to Elegoo)
- – Z axis accuracy: 0.00125mm
- – XY resolution: 0.051mm
- – Screen resolution: 6K – 5448×3064 pixels
- – Build volume: 278 x 156 x 300mm (L * W * H)
- – Light source: UV light wavelength 405nm
Contact us if you have any questions or when you need help with the Elegoo Jupiter or other resin based 3D-printers.
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!