Support > Printer Settings

Resin 3D-printing parameters for the EPAX X1K E6

The EPAX X1K E6 LCD / MSLA 3D-printer is an open resin printer with a 405 nm light source, compatible with 3rd party resin. Full list of resin settings can be find here. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.

Contact us

 

Resin 3D-printing parameters for the EPAX X1K E6

Resin Layer thickness Curing time (seconds) Remark
Strong-X 100 µm
50 µm 15 4 base layers of 35 seconds
35 µm
Tough-X 100 µm
50 µm 16 4 base layers of 40 seconds
35 µm
Flexible-X 100 µm
50 µm 19 4 base layers of 40 seconds
35 µm
Deep Blue 100 µm
50 µm
35 µm
Stone Coal Black 100 µm
50 µm
35 µm
Premium White 100 µm
50 µm
35 µm
Premium Black 100 µm
50 µm
35 µm
Premium Model 100 µm
50 µm
35 µm
Premium Flex 100 µm
50 µm
35 µm
Premium Tough 100 µm
50 µm
35 µm
Clear Impact 100 µm
50 µm
35 µm
Composite-X 100 µm
50 µm
Hazard Glow 100 µm

 

 

Epax3D Epax resin 3D-printer line-up compatible with liqcreate engineering resins

EPAX X1K 6″ 2K MONO resin 3D-printer features

    • – Parallel Matrix UV light source – This is the most advanced light source and available in the Epax3D E6 and E10 series. Providing more print detail for dental and jewelry applications where finer details are beneficial as well as a more even distribution of the light across the entire build area.
    • – Light source closer to LCD screen – requiring less time for the resin to cure in the Epax E6 and E10 and extending the life of your LCD screen.  
    • – A 3.5-inch Color TFT Touchscreen is present in the Epax3D E6 an E10 resin 3D-printers.
    • – 2K MONO (6 inch) LCD masking screen. 1620*2560 (2k) HD masking LCD allows for great print detail and much faster printing speed.  It typically only needs a few seconds for normal resin, compared to color screen which needs 8 to 10 seconds for regular resin to cure.  Pixel size is 50 microns.
    • – The mono screen uses SX04 interface to mainboard. It can last several thousands hours of normal use.  
    • – Improved Z-axis stability. 
    • – Pre-installed nFEP film to allow easier detachment during printing (you can still use standard FEP films with this printer if you prefer).
    • – Sanded build platform surface made of soft aluminum for better adhesion and easier print removal.
    • – Anti-Aliasing supported and enabled in installed firmware. Effectivity depending on resin and settings.
    • – Wide selection of supported resin – you can use any 405nm wavelength 3D-printing resin.
    • – 128mm (L) *81mm (W) *155mm (H) build volume.
    • – Built on our successful X1 frame, with a slightly larger mid plate in order to fit 6″ screen.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Tough-X Impact resin

    Tough-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Flexible-X resin for SLA DLP LCD flexible and elastic 3D printing

    Flexible-X

    Categories:
    EAN: N/A SKU: N/A
    Clear