Phrozen3D entered the resin 3D-printing market with resin based LCD / MSLA printers in 2016. Initially they launched a couple 3D-printers in the >$1000 range all based on LCD technology. They have been one of the first companies to develop a bigger LCD platform, next to the more expensive Structo3D Dental 3D-printer. Since 2020, Phrozen [...]
Read More
Find XYZ Nobel 1.0A compatible resins
Read More
The Qidi Tech Shadow 5.5S LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Due to the low power of the LED and RGB-LCD technology, the Premium resin range works best on this printer. Most other resins could also work on this printer, however, not all pre-settings are [...]
Read More
The Orange Longer 30 LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. The following settings are optimized for Liqcreate resins. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us [...]
Read More
The EPAX X10 LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Full list of settings can be find here. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. [...]
Read More
The Anycubic Photon Mono SE is a 2K monochrome LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for Liqcreate resins. Due to its monochrome LCD screen, exposure times are roughly 1/3rd compared to the regular Anycubic Photon. With this reduced exposure time even our DLP and SLA resins can be printed with [...]
Read More
The Creality LD-002H 2K Monochrome LCD/MSLA 3D-printer is an open printer with a 405 nm light source. The Creality LD-002H is completely open for 3rd party resins. Due to its monochrome screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. Some resins have been optimized. Most other resins could [...]
Read More
The Anycubic Photon Mono X is an 4K monochrome LCD / MSLA 3D-printer. The Mono X is compatible with Liqcreate resins. The following settings are optimized for Liqcreate resins. Due to its monochrome screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. Contact us if you have any questions. [...]
Read More
The Phrozen Sonic Mini and Phrozen Sonic XL 4K has been tested by partners. Not all settings have been optimized. Contact us if you need support or have any questions. Contact us Resin Layer thickness Curing time (seconds) Remark Strong-X 100 µm 15 6 base layers of 40 seconds 50 µm 30 µm [...]
Read More
The Peopoly Phenom L LCD/MSLA 3D-printer is a large, open printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us [...]
Read More