The Anycubic Photon M3 Max occupies a clear position in the large‑format MSLA segment and is frequently selected by users searching for reliable and repeatable Anycubic Photon M3 Max resin settings for engineering, dental and high‑volume prototyping workflows. Users comparing the M3 Max to other printers in the Anycubic ecosystem often evaluate the Anycubic Photon M3 Plus as a mid‑range alternative, or the newer Anycubic Photon Mono M7 Max for next‑generation 14K performance. As the largest printer in the M3 series, the M3 Max is designed for oversized components and batch production, making accurate resin parameters essential for dimensional stability, surface quality and predictable mechanical performance.
The system is built around a 13.6‑inch monochrome LCD with a native 7K resolution of 6480 × 3600 pixels. With a 46 µm pixel pitch, the M3 Max provides a balanced combination of large build volume and sufficient XY precision for functional parts, dental models and industrial prototypes. Its upgraded matrix light engine delivers uniform irradiance across the full 298 × 164 mm exposure area — a critical factor when printing engineering and dental resins where consistent polymerization directly influences accuracy, warpage behavior and layer bonding.
The 298 × 164 × 300 mm build volume enables large single‑piece components or multi‑part production runs. A laser‑engraved build plate improves first‑layer adhesion, while the nFEP film and long‑travel Z‑axis help maintain stable peeling forces, even with higher‑viscosity materials. These characteristics make the M3 Max well‑suited for Liqcreate’s engineering, dental and specialty resins.
This page provides the validated Anycubic Photon M3 Max resin settings for all supported Liqcreate materials, including exposure times, lift parameters and support recommendations. Almost all Liqcreate resins have been fully validated on the M3 Max. For users working across multiple printers, the complete overview of resin compatibility is available in the Liqcreate master database sheet. If you need assistance with resin selection or exposure tuning, you can always contact our engineering team. Download the Chitubox parameter file for Anycubic Photon M3 Max Liqcreate resin in the link. With this file you can import all Liqcreate resins in the Chitubox slicer within seconds and start printing right away!
Anycubic Photon M3 Max resin 3D‑printing parameters
The validated resin parameters below provide stable exposure times, lift settings and workflow guidance for consistent, high‑quality MSLA printing on the Anycubic Photon M3 Max. All settings are based on internal testing and partner‑validated data for Liqcreate engineering, dental and specialty materials.
| Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Rest time per step | Lift speed / retract speed | ||
| Deep Blue | 100 µm | 8,0 | 2 | 40 | 8 | 2,0 | 90 / 150 | |
| 50 µm | 6,0 | 2 | 30 | 8 | 2,0 | 90 / 150 | ||
| Stone Coal Black | 100 µm | 9,0 | 2 | 50 | 8 | 2,0 | 90 / 150 | |
| 50 µm | 7,0 | 2 | 40 | 8 | 2,0 | 90 / 150 | ||
| Premium White | 100 µm | 4,5 | 1 | 40 | 8 | 2,0 | 90 / 120 | |
| 50 µm | 3,5 | 1 | 30 | 8 | 2,0 | 90 / 120 | ||
| Premium Black | 100 µm | 5,0 | 2 | 30 | 8 | 2,0 | 90 / 120 | |
| 50 µm | 4,0 | 2 | 25 | 8 | 2,0 | 90 / 120 | ||
| Premium Model | 100 µm | 4,0 | 1 | 25 | 8 | 2,0 | 90 / 120 | |
| 50 µm | 3,0 | 1 | 20 | 8 | 2,0 | 90 / 120 | ||
| Premium Tough | 100 µm | 6,0 | 2 | 30 | 8 | 2,0 | 90 / 120 | |
| 50 µm | 5,0 | 2 | 20 | 8 | 2,0 | 90 / 120 | ||
| Wax Castable | 100 µm | 6,0 | 2 | 40 | 8 | 2,0 | 60 / 90 | |
| 50 µm | 5,0 | 2 | 35 | 8 | 2,0 | 60 / 90 | ||
| 35 µm | 4,0 | 2 | 30 | 8 | 2,0 | 60 / 90 | ||
| Premium Flex* | 100 µm | 4,5 | 2 | 40 | 10 | 2,0 | 60 / 90 | |
| 50 µm | 4,0 | 2 | 30 | 10 | 2,0 | 60 / 90 | ||
| Clear Impact | 100 µm | 12,0 | 2 | 60 | 8 | 2,0 | 60 / 90 | |
| 50 µm | 9,0 | 2 | 50 | 8 | 2,0 | 60 / 90 | ||
| Strong-X | 100 µm | 10,0 | 2 | 50 | 8 | 2,0 | 90 / 150 | |
| 50 µm | 8,0 | 2 | 50 | 8 | 2,0 | 90 / 150 | ||
| ESD | 100 µm | 8,0 | 2 | 60 | 8 | 2,0 | 90 / 150 | |
| 50 µm | 6,0 | 2 | 50 | 8 | 2,0 | 90 / 150 | ||
| Tough-X* | 100 µm | 14,0 | 2 | 50 | 10 | 2,0 | 90 / 120 | |
| 50 µm | 12,0 | 2 | 40 | 10 | 2,0 | 90 / 120 | ||
| Flexible-X* | 100 µm | 13,0 | 2 | 50 | 12 | 2,0 | 60 / 90 | |
| 50 µm | 10,0 | 2 | 40 | 12 | 2,0 | 60 / 90 | ||
| Elastomer-X* | 100 µm | 16,0 | 2 | 60 | 12 | 2,0 | 60 / 90 | |
| 50 µm | 14,0 | 2 | 60 | 12 | 2,0 | 60 / 90 | ||
| Hazard Glow | 100 µm | 9,0 | 2 | 50 | 8 | 2,0 | 90 / 150 | |
| Composite-X | 100 µm | 10,0 | 2 | 60 | 8 | 2,0 | 90 / 150 | |
| 50 µm | 8,0 | 2 | 50 | 8 | 2,0 | 90 / 150 | ||
| Bio-Med Clear | 100 µm | 7,0 | 2 | 60 | 8 | 2,0 | 90 / 150 | |
| 50 µm | 5,0 | 2 | 60 | 8 | 2,0 | 90 / 150 | ||
| Flame Retardant | 100 µm | 5,0 | 2 | 30 | 8 | 2,0 | 120 / 150 | |
| HDT | 50 µm | 4,0 | 2 | 20 | 8 | 2,0 | 120 / 150 | |
| Dental Model Pro Beige | 100 µm | 6,0 | 1 | 50 | 8 | 2,0 | 120 / 150 | |
| 50 µm | 4,5 | 1 | 40 | 8 | 2,0 | 120 / 150 | ||
| Dental Model Pro Grey | 100 µm | 5,0 | 1 | 40 | 8 | 2,0 | 90 / 120 | |
| 50 µm | 3,5 | 1 | 40 | 8 | 2,0 | 90 / 120 | ||
| Gingiva Mask | 100 µm | 10,0 | 1 | 20 | 10 | 2,0 | 90 / 120 | |
| 50 µm | 8,0 | 1 | 20 | 10 | 2,0 | 90 / 120 | ||
| Rigid Pro | 100 µm | 6,5 | 2 | 30 | 6 | 2,0 | 90 / 150 | |
| 50 µm | 5,5 | 2 | 20 | 6 | 2,0 | 90 / 150 |
Note: Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
Order Anycubic compatible resin
About the Anycubic Photon M3 Max resin 3D‑printer
The Anycubic Photon M3 Max is designed for large‑format resin production, combining a 13.6‑inch 7K monochrome LCD with a 298 × 164 × 300 mm build volume. The printer features smart resin filling, a laser‑engraved build platform for improved adhesion, and Anycubic’s LightTurbo matrix light source for uniform exposure across the full print area.
Image by Anycubic: The Anycubic Photon M3 Max monochrome resin 3D‑printer.
Anycubic Photon M3 Max 3D‑printer specifications
These specifications outline the optical, mechanical and workflow characteristics that determine print accuracy, resin compatibility and overall performance on the Anycubic Photon M3 Max.
- – 13.6″ 7K monochrome display
- – Large resin 3D-printer with a build volume: 298 × 164 × 300 mm
- – Smart resin filling system
- – Laser‑engraved print platform
- – LightTurbo Matrix light source
Need help with Liqcreate resin on the Anycubic Photon M3 Max?
If you have questions about resin compatibility, exposure tuning or workflow optimization for the Anycubic Photon M3 Max — or any other resin‑based 3D‑printer — you can contact our engineering team for validated guidance.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
