Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Anycubic Photon Zero

The Anycubic Photon Zero is a entry level 480P RGB LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for some Liqcreate resins. For the settings that are not available, a good starting point are the settings published for the Anycubic PhotonContact us if you have any questions or when you need help with settings.

 

Anycubic Photon Zero resin 3D-printing parameters

Resin Layer thickness Exposure time (seconds) Base layer count Base layer exposure Lift Height (mm) Lift speed / retract speed (mm/min) Off-time / bottom (seconds)
Deep Blue 100 µm
50 µm
Stone Coal Black 100 µm
50 µm
Premium White 100 µm
50 µm
Premium Black 100 µm
50 µm
Premium Model 100 µm
50 µm
Premium Tough 100 µm
50 µm
Wax Castable 100 µm
50 µm
Premium Flex 100 µm
50 µm
Clear Impact 100 µm
50 µm
Strong-X 100 µm
50 µm
Tough-X 100 µm
50 µm
Flexible-X 100 µm 26 2 120 10 90 / 240 0,5 / 3,0
50 µm
Hazard Glow 100 µm
Composite-X 100 µm
50 µm
Dental Model Pro Beige 50 µm
Dental Model Pro Grey 50 µm
Gingiva Mask 100 µm

*Heavy supports are adviced for Flexible-X and Tough-X

About the Anycubic Photon Zero

Anycubic photon zero resin engineering resin fast resins no odor low odour
Image by Anycubic: The anycubic Photon Zero

480P RGB LCD

The Anycubic Photon Zero has 480P RGB LCD display. With this technology, the Anycubic Photon Zero is one of the most affordable resin 3D-pritners available. Due to the RGB LCD technology, print speed is slower compared to the new monochrome LCD resin 3D-printers. The build platform of the Anycubic Photon Zero is 97 x 54 x 150 mm and the Zero has a XY resolution of 0,1155mm. This is a significantly lower resolution and print speed as Anycubic’s newer monochrome LCD resin 3D-printers.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Tough-X Impact resin

    Tough-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Flexible-X resin for SLA DLP LCD flexible and elastic 3D printing

    Flexible-X

    Categories:
    EAN: N/A SKU: N/A
    Clear