The Anycubic Photon Mono SE is a 2K monochrome LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for Liqcreate resins. Due to its monochrome LCD screen, exposure times are roughly 1/3rd compared to the regular Anycubic Photon. With this reduced exposure time even our DLP and SLA resins can be printed with relatively reasonable printing speed. Contact us if you have any questions.
Download the Chitubox Anycubic Photon Mono SE resin parameters.
Anycubic Photon Mono SE resin 3D-printing parameters
|Resin||Layer thickness||Exposure time (seconds)||Base layer count||Base layer exposure||Lift Height (mm)||Lift speed / retract speed (mm/min)||wait time every step (seconds)|
|Deep Blue||100 µm||6,5||2||70||6||90 / 240||1,0|
|50 µm||5,0||3||70||6||90 / 240||1,0|
|Stone Coal Black||100 µm||6,5||2||60||6||90 / 240||1,0|
|50 µm||5,0||3||50||6||90 / 240||,,0|
|Premium White||100 µm||4,0||2||60||6||90 / 240||1,0|
|50 µm||6||90 / 240||1,0|
|Premium Black||100 µm||4,0||2||70||6||90 / 240||1,0|
|50 µm||3,5||2||50||6||90 / 240||1,0|
|Premium Model||100 µm||3,0||2||60||6||60 / 60||2,0|
|50 µm||2,0||2||20||6||60 / 60||2,0|
|Premium Tough||100 µm||5,5||2||30||6||90 / 240||2,0|
|50 µm||5,0||2||20||6||90 / 240||2,0|
|Wax Castable||100 µm||4,0||2*||60||6||60 / 90||2,0|
|50 µm||3,0||3*||40||6||60 / 90||2,0|
|Premium Flex||100 µm||4,0||2||40||10||60 / 60||2,0|
|Clear Impact||100 µm||10,0||2||80||6||90 / 240||1,0|
|50 µm||8,0||3||60||6||90 / 240||1,0|
|Strong-X||100 µm||8,0||2||80||6||90 / 240||1,0|
|50 µm||6,5||3||80||6||90 / 240||1,0|
|Tough-X||100 µm||14,0||2||80||6||90 / 240||2,0|
|50 µm||12,0||3||60||6||90 / 240||2,0|
|Flexible-X||100 µm||9,0||2||75||10||90 / 240||2,0|
|Hazard Glow||100 µm||8,0||2||60||6||90 / 240||1,0|
|Composite-X||100 µm||6,0||2||50||6||90 / 240||1,0|
|50 µm||5,0||3||40||6||90 / 240||1,0|
|Dental Model Pro Beige||50 µm||5,0||2||30||6||90 / 90||2,0|
|Dental Model Pro Grey||50 µm||3,0||2||50||6||90 / 90||2,0|
|Gingiva Mask||100 µm||15,0||2||80||10||60 / 60||2,0|
About the Anycubic Photon Mono SE
2K Monochrome LCD
The Anycubic Photon Mono SE has a 6-inch monochrome LCD display. With its new technology, the Photon Mono prints at unbelievable printing speeds, so that it only takes 1-2 seconds per layer – compared to conventional LCD 3D printers with 7-8 seconds per layer. The monochrome LCD is also thermally stable and has a much longer service life than conventional LCD displays. You can print with it for over 2000 hours! In addition, thanks to the larger LCD display, the Photon Mono SE also has a slightly larger installation space of 130 x 78 x 160 mm.
New matrix light source
The new matrix light source has been redesigned and consists of several UV LED lights that have a more even exposure. This not only improves accuracy but also enables faster exposure times and better heat dissipation.
Anycubic App Remote Control
The Photon Mono SE has a WiFi module, so you have much more convenient connectivity than conventional 3D printers. You can also connect your Photon Mono SE using the Anycubic app, where you can monitor your printing process or adjust the print settings.
The Anycubic Photon Mono SE has a metal housing and stable dual linear rails to significantly improve the resin print stability and success rate.
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!