The evolution of high‑resolution MSLA printing has accelerated rapidly in recent years, and the Anycubic Photon Mono M7 Pro represents one of the most ambitious steps in this segment to date. Rather than focusing solely on resolution, Anycubic designed the M7 Pro as a balanced platform where optical precision, mechanical stability, and high‑speed curing work together to support demanding engineering, jewelry and dental photopolymers. This makes it a particularly relevant machine for users working with advanced materials such as the Liqcreate resin portfolio.
At the center of the system is a 14K monochrome LCD with a native resolution of 13312 × 5120 pixels. Combined with the panel’s rectangular geometry, this results in an XY pixel size of 16.8 × 24.8 micrometers, enabling the M7 Pro to reproduce micro‑features, sharp edges, and fine surface textures with consistency across the entire 223 × 126 × 230 mm build area. The optical engine uses a high‑transmission LCD and a uniform parallel‑light matrix, ensuring that irradiance remains stable even during long prints or when working with resins that require higher energy density.
Where the M7 Pro distinguishes itself from the standard M7 is in its motion system and process control. The reinforced Z‑axis, upgraded carriage assembly, and optimized peel‑force management allow the printer to maintain accuracy at elevated print speeds. This is particularly important more challenging resins, often with higher viscosity or require controlled lift profiles to avoid delamination. The M7 Pro’s firmware is tuned to handle these conditions, enabling faster cycle times without compromising dimensional stability.
For users working with Liqcreate materials, the Anycubic Photon Mono M7 Pro resin settings published in this article provide a foundation for reliable printing. Exposure times, lift speeds, bottom layer strategies, and support recommendations have been tested on the M7 Pro platform to ensure predictable curing behavior. The M7 Pro entered the Liqcreate laboratory in August 2024, and all tested parameters are included here to help users achieve optimal results from the first print. When you have any questions or in need for parameters with Liqcreate resins, please reach out to us at info@liqcreate.com. Download the Chitubox parameter file for Anycubic Photon Mono M7 Pro with Liqcreate resin in the link. With this file you can import all Liqcreate resins in the Chitubox slicer within seconds and start printing right away!
Anycubic Photon Mono M7 Pro Highlights
- – 223 x 126 x 230mm Printing Volume
- – 130mm/h for Even Standard Resins. 170mm/h with High-speed Resin, 0.1mm Layer (*manufacturers claim)
- – 10.1, 14K LCD screen
- – 13320 x 5120 pixels with a pixel size of 16.8 x 24.8 micrometer
- – Controledl Heating
- – Auto Resin Refill and Withdrawal
Anycubic Photon Mono M7 Pro resin settings.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | |
| Strong-X | 100 µm | 6,0 | 2 | 60 | 6 | 90 / 120 | |
| 50 µm | 4,5 | 2 | 50 | 6 | 90 / 120 | ||
| Stone Coal Black | 100 µm | 6,0 | 2 | 60 | 6 | 90 / 120 | |
| 50 µm | 4,5 | 2 | 50 | 6 | 90 / 120 | ||
| Premium White | 100 µm | 3,0 | 2 | 50 | 6 | 90 / 120 | |
| 50 µm | 2,0 | 2 | 40 | 6 | 90 / 120 | ||
| Premium Black | 100 µm | 4,0 | 2 | 40 | 6 | 90 / 120 | |
| 50 µm | 3,0 | 2 | 30 | 6 | 90 / 120 | ||
| Premium Model | 100 µm | 3,0 | 2 | 50 | 6 | 90 / 120 | |
| 50 µm | 2,0 | 2 | 40 | 6 | 90 / 120 | ||
| Premium Tough | 100 µm | 5,0 | 2 | 40 | 6 | 90 / 120 | |
| Wax Castable | 100 µm | 4,0 | 2 | 50 | 6 | 90 / 120 | |
| 50 µm | 3,0 | 2 | 40 | 6 | 90 / 120 | ||
| 25 µm | 2,5 | 2 | 40 | 6 | 90 / 120 | ||
| Premium Flex* | 100 µm | 4,0 | 2 | 40 | 10 | 60 / 90 | |
| 50 µm | 3,0 | 2 | 40 | 10 | 60 / 90 | ||
| Clear Impact | 100 µm | 10,0 | 2 | 60 | 6 | 90 / 120 | |
| 50 µm | 6,0 | 2 | 50 | 6 | 90 / 120 | ||
| Deep Blue | 100 µm | 6,0 | 2 | 50 | 6 | 90 / 120 | |
| 50 µm | 4,0 | 2 | 50 | 6 | 90 / 120 | ||
| ESD | 100 µm | 7.0 | 2 | 60 | 8 | 90 / 150 | |
| 50 µm | 5.0 | 2 | 50 | 8 | 90 / 150 | ||
| Tough-X* | 100 µm | 12,0 | 2 | 60 | 8 | 90 / 120 | |
| 50 µm | 10,0 | 2 | 50 | 8 | 90 / 120 | ||
| Flexible-X* | 100 µm | 10,0 | 2 | 60 | 10 | 60 / 90 | |
| 50 µm | 8,0 | 2 | 60 | 10 | 60 / 90 | ||
| Elastomer-X* | 100 µm | 20 | 2 | 60 | 10 | 60 / 90 | |
| 50 µm | n/a | ||||||
| Hazard Glow | 100 µm | 8,0 | 2 | 60 | 6 | 90 / 120 | |
| Composite-X | 100 µm | 7,0 | 2 | 60 | 6 | 90 / 120 | |
| 50 µm | n/a | ||||||
| Bio-Med Clear | 100 µm | 4,5 | 2 | 60 | 6 | 90 / 120 | |
| 50 µm | 3,0 | 2 | 50 | 6 | 90 / 120 | ||
| Dental Model | 100 µm | 5,0 | 2 | 60 | 6 | 90 / 150 | |
| Pro Beige | 50 µm | 4,0 | 2 | 50 | 6 | 90 / 150 | |
| Dental Model | 100 µm | 5,0 | 2 | 60 | 6 | 60 / 90 | |
| Pro Grey | 50 µm | 3,5 | 2 | 50 | 6 | 60 / 90 | |
| Gingiva Mask | 100 µm | 12,0 | 2 | 60 | 10 | 60 / 90 | |
| 50 µm | 8,0 | 2 | 60 | 10 | 60 / 90 | ||
| Separation Model | 100 µm | 4,0 | 1 | 20 | 6 | 90 / 120 | |
| 50 µm | 3,0 | 1 | 15 | 6 | 90 / 120 | ||
| Flame Retardant HDT | 100 µm | 4.0 | 2 | 40 | 6 | 90 / 120 | |
| 50 µm | 3,0 | 2 | 40 | 6 | 90 / 120 | ||
| Rigid Pro | 100 µm | 5,0 | 2 | 50 | 6 | 90 / 120 | |
| 50 µm | 4,0 | 2 | 40 | 6 | 90 / 120 |
** Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
Find Anycubic compatible resin
About the Anycubic Photon Mono M7 Pro resin 3D-printer.
Image by Anycubic: The new Anycubic Photon Mono M7 Pro resin 3D-printer.
Anycubic Photon Mono M7 Pro resin 3D-printer specifications
| Sonic Mighty Revo | Anycubic Photon Mono M7 Pro | |
| Device size | 353 x 345 x 517 mm | 312 x 315 x 520 mm |
| Build volume | 223 x 126 x 235 mm | 223 x 126 x 230 mm |
| LCD | 14K Monochrome | 14K Monochrome |
| XY resolution | 16.8 x 24 µm | 16.8 x 24.8 µm |
| Guide rails | dual linear guide rail (ball screws) | unknown |
| Film | NFEP | |
| Heater | Yes | Yes (25°C stabilizer) |
| Plug-in Air Purifier | Yes | Yes |
| Automatic levelling | Yes | Yes |
If you have any questions related to Liqcreate 3D-printing resins on the Anycubic Photon Mono M7 Pro or other resin based 3D-printer. Send us an e-mail at info@liqcreate.com and our engineers will support with the requested Liqcreate resin.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
