Support > Printer Settings

Which printing settings should be used to print Liqcreate resins on the Formlabs Form1+ and Form2?

The Formlabs Form2 and Form 1+ are thoroughly tested by the Liqcreate team and are compatible with the Liqcreate resins. The Form2 is a high-end SLA printer, in combination with Liqcreate resin a perfect solution for the professional market.

The Form1+ is open for 3th party resins. We recommend to print Liqcreate Clear Impact on the Clear V3 settings and all the other resins on the “Grey V3” settings. Layers thicknesses of 100, 50 and 25 microns are supported. The Form2 is open for 3th party resins when used in the open mode. The open mode disable some of the features of the machine and therefor manual refil of the resin thank is necessary.

Formlabs tutorial on using Open Mode

Resin Layer thickness Settings
Deep Blue 100 µm Grey V3 100 µm
50 µm Grey V3 50 µm
25 µm Grey V3 25 µm
Stone Coal Black 100 µm Grey V3 100 µm
50 µm Grey V3 50 µm
25 µm Grey V3 25 µm
Premium White 100 µm n/a
50 µm n/a
25 µm n/a
Premium Black 100 µm n/a
50 µm n/a
25 µm n/a
Clear Impact 100 µm Clear V3 100 µm
50 µm Clear V3 50 µm
25 µm Clear V3 25 µm
Strong-X 100 µm Clear V3 100 µm
50 µm Grey V3 50 µm
25 µm Grey V3 25 µm
Hazard Glow 100 µm Grey V3 100 µm
50 µm Grey V3 50 µm
25 µm Grey V3 25 µm

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us