Halfway 2024 Elegoo has announced two successors in the Mars series. The new Mars 5 and Mars 5 Ultra were announced. With previous printer releases Elegoo would make the Ultra a bit fancier, or slightly faster, mostly minor changes. With this new release they used a lower resolution LCD screen in the Mars 5 (4K) vs. the Mars 5 Ultra (9K). this is a bit odd as the Mars 3 used a 4K screen while the Mars 4 was already upgraded to a 9K screen. See the full printer comparison below. The Elegoo Mars 5 (regular edition) has a build volume of 143,43 x 89,6 x 150 mm, with its 4K LCD screen this results in a pixel size of 35 microns. In this article you can find print parameters for the Elegoo Mars 5. If you are looking for Elegoo Mars 5 Ultra resin parameters you can find it in the link.
The Elegoo Mars 5 is arrived in our lab in oktober 2024 and setting optimization will be updated weekly.
Elegoo Mars 5 resin 3D-printing parameters – Updated weekly
Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height | Lift speed / retract speed (mm/min) | Rest time in every step (seconds) |
Deep Blue | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Stone Coal Black | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Premium White | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Premium Black | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Premium Model | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Premium Tough | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Wax Castable | 100 µm | n/a | |||||
50 µm | n/a | ||||||
25 µm | n/a | ||||||
Premium Flex | 100 µm | n/a | |||||
** | 50 µm | n/a | |||||
Clear Impact | 100 µm | 8,0 | 2 | 60 | 6 | 90 / 120 | 2,0 |
50 µm | 6,0 | 2 | 60 | 6 | 90 / 120 | 2,0 | |
Strong-X | 100 µm | n/a | |||||
50 µm | n/a | ||||||
ESD | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Tough-X | 100 µm | n/a | |||||
** | 50 µm | n/a | |||||
Flexible-X | 100 µm | n/a | |||||
** | 50 µm | n/a | |||||
Elastomer-X | 100 µm | n/a | |||||
** | 50 µm | n/a | |||||
Hazard Glow | 100 µm | n/a | |||||
Composite-X | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Flame Retardant | 100 µm | n/a | |||||
HDT | 50 µm | n/a | |||||
Bio-Med Clear | 100 µm | 5,0 | 2 | 60 | 6 | 90 / 120 | 2,0 |
50 µm | 3,5 | 2 | 50 | 6 | 90 / 120 | 2,0 | |
Dental Model Pro Beige | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Dental Model Pro Grey | 100 µm | n/a | |||||
50 µm | n/a | ||||||
Gingiva Mask | 100 µm | n/a | |||||
50 µm | n/a |
*All profiles used 8 transition layers, except otherwise noted.
** Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
About the Elegoo Mars 5 resin MSLA / LCD 3D-printer.
Image by Elegoo: The Elegoo Mars 5 a 4K MSLA resin 3D-printer
Elegoo Mars 5 resin 3D-printer specifications.
Mars 5 | Mars 5 Ultra | |
3D-printer size | 230 x 230 x 433,5 mm | 260 x 268 x 451,5 mm |
3D-printer weigth | 6,6 kg | 8,8 kg |
Build volume | 143,43 x 89,6 x 150 mm | 153,36 x 77,76 x 165 mm |
Light source | 405nm COB | |
XY resolution | 35 x 35 µm
4098 x 2560 pixels |
18 x 18 µm
8520 x 4320 pixels |
Screen resolution | 4K monochrome | 9K monochrome |
Maximum print speed | 70 mm/hour (resin dependant) | 150 mm/ hour (resin dependant) |
Contact us if you have any questions or when you need help with settings for Liqcreate resin with the Elegoo Mars series or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!