Support > Printer Settings

Resin 3D-printing parameters for the Elegoo Mars 5 Ultra – 9K

During the summer of 2024 Elegoo has announced a successor in the Mars series. The new Mars 5 and Mars 5 Ultra were announced. With previous printer releases Elegoo would make the Ultra slightly fancier, or slightly faster. So mostly minor changes. With this new release they used a higher resolution LCD screen in the Mars 5 Ultra (9K) vs. the Mars 5  (4K). This is an odd move as the Mars 3 used a 4K screen while the Mars 4 was already upgraded to a 9K screen. See the full printer comparison below. The Elegoo Mars 5 Ultra (9K edition) has a build volume of 153,36 x 77,76 x 165 mm , with its 9K LCD screen this results in a pixel size of 18 microns. In this article you can find print parameters for the Elegoo Mars 5 Ultra. If you are looking for Elegoo Mars 5 (4K) resin parameters you can find it in the link.

The Elegoo Mars 5 Ultra arrived in our lab end of september 2024 and new setting optimization will published weekly. If you are waiting for a setting, please reach out to us at info@liqcreate.com and we will prioritize testing accordingly.

 

Elegoo Mars 5 Ultra resin 3D-printing parameters – Updated weekly

Resin Layer thickness Exposure time (seconds) Base layer /transition layers Base layer exposure Speed Waiting mode Rest time per step (seconds)
Deep Blue 100 µm 8,0 2 / 10 60 Fast Resting Time 2,0/0/0,5
50 µm 5,5 2 / 10 50 Fast Resting Time 2,0/0/0,5
Stone Coal Black 100 µm 8,0 2 / 10 60 Fast Resting Time 2,0/0/0,5
50 µm 5,5 2 / 10 50 Fast Resting Time 2,0/0/0,5
Premium White 100 µm n/a
50 µm n/a
Premium Black 100 µm 4,0 2 / 10 40 Fast Resting Time 2,0/0/0,5
50 µm 2,5 2 / 15 30 Fast Resting Time 2,0/0/0,5
Premium Model 100 µm 4,0 2 / 10 50 Fast Resting Time 2,0/0/0,5
50 µm 3,0 2 / 15 40 Fast Resting Time 2,0/0/0,5
Premium Tough 100 µm n/a
50 µm n/a
Wax Castable 100 µm 7,0 2 / 10 70 Fast Resting Time 2,0/0/0,5
50 µm 4,5 2 / 10 60 Fast Resting Time 2,0/0/0,5
25 µm 4,0 2 / 10 55 Fast Resting Time 2,0/0/0,5
Premium Flex 100 µm n/a
** 50 µm n/a
Clear Impact 100 µm 10,0 2 / 10 60 Fast Resting Time 2,0/0/0,5
50 µm 8,0 2 / 15 50 Fast Resting Time 2,0/0/0,5
Strong-X 100 µm 7,5 2 / 10 60 Fast Resting Time 2,0/0/0,5
50 µm 6,0 2 / 10 50 Fast Resting Time 2,0/0/0,5
ESD 100 µm 6,0 2 / 10 60 Fast Resting Time 2,0/0/0,5
50 µm n/a
Rigid Pro 100 µm 6,5 2 / 10 60 Fast Resting Time 2,0/0/0,5
50 µm 4,0 2 / 15 50 Fast Resting Time 2,0/0/0,5
Tough-X 100 µm 13,0 2 / 10 60 Slow Resting Time 2,0/0/0,5
** 50 µm 11,5 2 / 15 60 Slow Resting Time 2,0/0/0,5
Flexible-X 100 µm 10,0 2 / 10 60 Slow Resting Time 2,0/0/0,5
** 50 µm 8,5 2 / 15 50 Slow Resting Time 2,0/0/0,5
Elastomer-X 100 µm n/a
** 50 µm n/a
Hazard Glow 100 µm n/a
Composite-X 100 µm n/a
50 µm n/a
Flame Retardant 100 µm n/a
HDT 50 µm n/a
Bio-Med Clear 100 µm 6,0 2 / 10 80 Slow Resting Time 2,0/0/0,5
50 µm 4,0 2 / 10 70 Slow Resting Time 2,0/0/0,5
Dental Model Pro Beige 100 µm 5,0 2 / 10 70 Fast Resting Time 2,0/0/0,5
50 µm 4,0 2 / 15 70 Fast Resting Time 2,0/0/0,5
Dental Model Pro Grey 100 µm 5,5 2 / 10 60 Fast Resting Time 2,0/0/0,5
50 µm 3,5 2 / 10 50 Fast Resting Time 2,0/0/0,5
Gingiva Mask 100 µm n/a
50 µm n/a

*All profiles used 8 transition layers, except otherwise noted.

** Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.

 

Find Elegoo compatible resins

 

About the Elegoo Mars 5 Ultra resin MSLA / LCD 3D-printer.

Elegoo Mars 5 ultra resin 9K liqcreate jewelry engineering dental flexible tough strong wax model aligner precision material

Image by Elegoo: The Elegoo Mars 5 Ultra a 9K MSLA resin 3D-printer

 

Elegoo Mars 5 Ultra resin 3D-printer specifications.

Mars 5 Mars 5 Ultra
3D-printer size 230 x 230 x 433,5 mm 260 x 268 x 451,5 mm
3D-printer weigth 6,6 kg 8,8 kg
Build volume 143,43 x 89,6 x 150 mm 153,36 x 77,76 x 165 mm
Light source 405nm COB
XY resolution 35 x 35 µm

4098 x 2560 pixels

18 x 18 µm

8520 x 4320 pixels

Screen resolution 4K monochrome 9K monochrome
Maximum print speed 70 mm/hour (resin dependant) 150 mm/ hour (resin dependant)

 

Contact us if you have any questions or when you need help with settings for Liqcreate resin with the Elegoo Mars series or other resin based 3D-printers.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Can’t find your answer?

Is your question still unanswered? No need to worry, ask us!

Contact us


Our Best Selling Products

  • Liqcreate Strong-X 1KG bottle

    Strong-X

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Wax Castable for casting objects using LCD/MSLA, DLP and SLA 3D printing

    Wax Castable

    Categories:
    EAN: N/A SKU: N/A
    Clear
  • Liqcreate Bio-Med Clear 1KG bottle no shade 939x939

    Bio-Med Clear

    Categories:
    EAN: N/A SKU: N/A
    Clear