← Support

Printer Settings

Need to know more about printer settings and 3D printer resins by Liqcreate? Look here for your printer settings for our resins with printers by Formlabs, Miicraft, Sprintray, Anycubic, Kudo3D, Cubicon, Wanhao and others.

Resin 3D-printing parameters for the Qidi Tech Shadow 5.5S

The Qidi Tech Shadow 5.5S LCD/MSLA resin 3D-printer is an open printer with a 405 nm light source. The Qidi Tech is compatible with 3rd party resin. Due to the low power of the LED and RGB-LCD technology, the Liqcreate Premium resin range works best on this printer. Most other resins could also work on [...]
Read More

Resin 3D-printing parameters for the Longer Orange 30

The Longer Orange 30 LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Other Longer Orange resin 3D-printer settings are also available. The following settings are optimized for Liqcreate resins. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if [...]
Read More

EPAX X10 Color compatible Liqcreate resin & 3D-print settings

The EPAX X10 color LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Full list of settings can be find here. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have [...]
Read More

Anycubic Photon Mono SE compatible Liqcreate resin & settings

The Anycubic Photon Mono SE is a 2K monochrome LCD 3D-printer, completely open for 3rd party resins. Settings are optimized for Liqcreate resins. Due to its monochrome LCD screen, exposure times are roughly 1/3rd compared to the regular Anycubic Photon. With this reduced exposure time even our DLP and SLA resins can be printed with [...]
Read More

3D-printing parameters for Liqcreate resins for Creality LD-002H

The Creality LD-002H 2K Monochrome LCD/MSLA 3D-printer is an open printer with a 405 nm light source. The Creality LD-002H is completely open for 3rd party resins. Due to its monochrome screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. Some resins have been optimized. Most other resins could [...]
Read More

Resin 3D-printing settings for Anycubic Photon Mono-X

The Anycubic Photon Mono-X is an 4K monochrome LCD / MSLA resin 3D-printer. The Anycubic Photon Mono-X is compatible with Liqcreate resinsThe following settings are optimized for Liqcreate resin. Due to its monochrome LCD screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. More information about the differences between [...]
Read More

Compatible resins & settings for the Phrozen Sonic Mini

The Phrozen Sonic Mini and Phrozen Sonic XL 4K haven been optimized by our partners. Not all settings are currently available. If your preferred resin is not listed, please reach out to info@liqcreate.com and our technical team will help.   Contact us   Phrozen Sonic Mini resin 3D-printing settings. Resin Layer thickness Curing time (seconds) [...]
Read More

Printing parameters for Liqcreate resins on the Peopoly Phenom L

The Peopoly Phenom L LCD/MSLA 3D-printer is a large, open printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us   [...]
Read More

Creality LD-002R compatible Liqcreate resin & parameters

The Creality LD-002R 2K RGB LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions. Contact us   Resin [...]
Read More

EPAX X1N compatible Liqcreate resin & 3D-print settings

The EPAX X1N LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Settings for the EPAX X10 with RGD color LCD screen are tested by EPAX3D. Full list of settings can be find here. Some resins have been optimized. Most other resins could also work on this [...]
Read More